Jump to content
SAU Community

Recommended Posts

hi im going 2 be doing some work 2 my brakes (paint, new seals, speed bleeders, etc) so i was just wondering were i can get new seals, and pistons "they look a little rusted" and also any idea on the cost.

the car will be on blokes for sum time so can any one recommend any were to get my rotors re skimmed because there looking like chrome :laugh:

also i was just going 2 take my brake lines down to the local earls distributor to get some replacements. is they any other brands of brake lines i should be looking at ?

i have had enough of mechanics they cant fix shit so im doing it all my self

Link to comment
https://www.sau.com.au/forums/topic/298918-were-2-get-parts/
Share on other sites

i went down 2 malz 2day looking 4 seals they say there dont have any for R33 but they have them for R32 but this is confusing because the R32 has 3 different brake configurations :D

done some looking around and nissan brake pistons go 4 +$100 each :blink: at that price i think i will just clean them up with some 2000 grit sand paper

and wow its very hard to find out what size speed bleeder 2 put on. i have looked every were but i can find a part number or any dimensions (need some help on this)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...