Jump to content
SAU Community

Recommended Posts

Depends where you garage and use your car. If it sits out in the sun a lot during the year like mine then I would suggest that it will need polishing up to 4 times per year. ( I live in Brisbane and lots of uv degradation of paint) but if kept inside mostly and you live well south of the tropics then you might get away with less frequent polishing. Though black is one of the hardest coloured cars to maintain.

Lots of good polishes on the market. I personally prefer Mcguiars NXT generation Tech wax 2. Good prep is most important so get it buffed first or at least buy a quick clay cleaner (I use the Armourall one because its cheaper and just as good as the Mcguiars). Wash it weekly if you can and run your hand over the paint surface after wash and chamois dry. If you no longer feel the smooth slippery suface that it had after polishing then you need to repolish. And if it has been more than a few months then a quick clay treatment will remove a lot of surface contaminants without having to go to the trouble of re buffing.

Good luck

Washed weekly, or 2nd week if i don't drive it much (it's a weekender).

Most washes will be followed up by a spray wax afterwards.

Waxed approximately once every 3 months, as it's a weekender that doesn't see much sun/use.

Proper clay, machine cut/buff, polish, liquid sealant, paste wax once a year.

I use mostly Pinnacle products. My wash liquid however is megs nxt.

Sometimes the bonnet, roof and boot will get waxed for the heck of it (these are your most hard hit areas from UV). Almost all old cars will suffer paint fade/crack on bonnet first, followed by roof and boot at the same time.

Hrmm, i'm due to give my V a big detail..

I'm a major fan of Meguiars' products. I go by the one rule I was given when my Maxima was resprayed over a decade ago ... polish and wax your vehicle when the water stops beading. That's typically every 6 months in my case, with 300km long trips perhaps 10 times in a year and often garaged up whether at home or at work.

When the time comes, it's a five step process:

Wash, Scratch-X for the more stubborn spots, surface prep/polish with their Gold Class Surface Prep, Show Car (#7) glaze and wax with Gold Class Wax.

Edited by The Max

Couple of options...but you have to make sure it IS only dust, not dirt etc (for the contact methods).

A good quality microfibre cloth, DO NOT apply pressure. Simply let the cloth glide over the paintwork. Applying pressure will cause the dust/fine dirt to be pushed against the clear coat, thus creating microscratches aka swirl marks (round scratches you see in the sun, but don't see when there's no strong light etc).

Couple of companies make a dusting brush..it's a large brush with many strands of a special type of fabric coated in paraffin wax amongst other stuff.. that should work ok too.

A watering can is another option.. long as your car is well waxed, pour the water over the car and as the water runs off, it will collect the dust and dirt. It takes some practice to achieve the "sheeting" effect, which is where you pour the water in a certain way so when it runs off, the paint is 90% or more dry.. leaves only a few spots of water you dab with an MF cloth. Youtube has some videos of people showing how to sheet water on paint.

Can also use a waterless wash system..these are self explanatory when you buy the kit.

How about if i just wanna get rid of dust ?

wipe it with a cloth or duster ?

Meguiars Final Inspection and a cotton cloth. Very handy for bird droppings too when they're no older than a few hours. As was said before, make sure it's only dust or light dirt and not medium-heavy dirt when using this stuff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...