Jump to content
SAU Community

Recommended Posts

For some time now I have been considering buying a daily car to cruise around, and the V35 350GT-8 filled my criteria and budget. I am aware of the gearbox expenses associated with the CVT models. Unfortunately this has only made me wary so I'm now after another issue that might knock it out of my "daily shitbox" list :)

What I am after is the standard ride height of the car... if possible in comparison to a standard R33 (what I currently have :) ) Reason being my R33 is all well and good at the moment but I imagine the days where I would drive along a dirt road in the bush without a second thought are coming to an end :D

So please post up figures, experiences bottoming out, stories about smashing front bars or how I am a retard for choosing a V35 4 door :D

Link to comment
https://www.sau.com.au/forums/topic/299485-v35-sedan-ride-hight/
Share on other sites

Re: your worries on the CVT... then why don't you consider the 350GT sedan (without the -8)

you do realise that the V35 sedan is also available in 5 speed conventional automatic (same as 350Z's & V35 coupe's) transmission as well? It even is available in 6sp manual if you look hard.

Re: ride height, I have no idea.

Re: your worries on the CVT... then why don't you consider the 350GT sedan (without the -8)

you do realise that the V35 sedan is also available in 5 speed conventional automatic (same as 350Z's & V35 coupe's) transmission as well? It even is available in 6sp manual if you look hard.

I have considered it, but one of my criteria is price... unless I get one imported (which I am considering...) I can only afford the 350GT-8. Also, my concern isn't that great. I throw about $200 worth of gearbox oil into my R33 every 12 months, $800 every 100,000km is a little more but if that is what I have to pay then I will have to pay it.

Major fear would be the gearbox failure, which I would imagine would be uncommon as the cars aren't 11ty years old and (hopefully) have had relatively easy lives.

But back to the subject, if it rides too low for my liking I won't buy ANY V35, be it CVT, auto, manual or Fred Flintstone style. Would probably go a WRX or an Aristo :down:

I have considered it, but one of my criteria is price... unless I get one imported (which I am considering...) I can only afford the 350GT-8. Also, my concern isn't that great. I throw about $200 worth of gearbox oil into my R33 every 12 months, $800 every 100,000km is a little more but if that is what I have to pay then I will have to pay it.

Major fear would be the gearbox failure, which I would imagine would be uncommon as the cars aren't 11ty years old and (hopefully) have had relatively easy lives.

But back to the subject, if it rides too low for my liking I won't buy ANY V35, be it CVT, auto, manual or Fred Flintstone style. Would probably go a WRX or an Aristo :down:

If ride height is your worries for going over dirt roads....why bother with a skyline?? Buy a 4WD.

Also, my concern isn't that great. I throw about $200 worth of gearbox oil into my R33 every 12 months, $800 every 100,000km is a little more but if that is what I have to pay then I will have to pay it.

Major fear would be the gearbox failure, which I would imagine would be uncommon as the cars aren't 11ty years old and (hopefully) have had relatively easy lives.

If you can't afford the auto or manual then you shouldn't consider the cvt either... I think a new cvt is in the order of $17000 and noone in Australia specializes in fixing this particular xtroid one.. cvt failures are more common than you might like to believe.. The cvt V35s are usually cheaper for a reason..

Your call.

agree...

all it takes is the previous owner not treating the gearbox well, regardless if it's a 2004 model it will still go bang.

they may be cheaper to buy, but they may not be cheaper to own.

For example, CVT gearbox oil need to be ordered special, and they cost about $1000 excluding labour just for the oil itself.

as long as V35 is not lowered, I don't see any issue with ride height especially since they are higher than 350Z from factory, but if you are worried about ride height as other ppl said should have gone for a 4WD. heck we have a RAV4 in addition to he V35 and the RAV4 is a great affordable 4WD!

You can drop a V35 to a reasonable looking height without it being too much trouble.

The wheels are located fairly close to the front and back of the car, e.g. there is not much overhang to hit on driveways. Most of the stuff underneath the car is tucked up pretty well so speedhumps dont bother me either.

I have a 4dr 6mt and can assure you that ride height is not an issue. It is only slightly lower than my VX commodore and even though I was really careful about hitting parking bump stops etc in the first months with the car it seems to just go over them. Certainly no overhang issues for normal driveways and suspension is quite comfortable even running 46psi in my tyres for higher performance and grip levels.

Several other coupe owners I know have lowered their cars and have done damage to front bar mainly but std height is no problem.

If ride height is your worries for going over dirt roads....why bother with a skyline?? Buy a 4WD.

I currently drive my R33 on these roads and I do it relatively comfortably if the road isn't muddy and has been graded regularly. Only issue is the tyres that I have on my car are shit on dirt... literally like driving on marbles. I imagine coil overs and neg camber are only going to make this worse.

In fact, I'm willing to say I take my R33 bush than most people in Sydney take there 4WDs :)

You can drop a V35 to a reasonable looking height without it being too much trouble.

The wheels are located fairly close to the front and back of the car, e.g. there is not much overhang to hit on driveways. Most of the stuff underneath the car is tucked up pretty well so speedhumps dont bother me either.

This is the kind of response I was after, my R33 scrapes a few driveways at standard ride hight and I don't want a car that is worse! Thanks :blink:

There seems like there are a lot of people politely suggesting I reconsider a CVT model... perhaps a little more research is in order on my part, and not just the cost of servicing and/or replacement... Though I'm still thinking that it will be like any other car where a thrashed one will break and one that hasn't been thrashed will break some time after the thrashed one, though I need to remind myself that CVT isn't exactly conventional :down:

This is how mine sits lowered approx 1" all round on 350z suspension. No clearance issues at all but because I added the factory front lip, just need to be extra careful when parking up against gutters and going up certain driveways.

Mine is a series 2 350GT 5spd Auto. You should be able to pick a decent example of these between low to mid 20s. (late 2004 onwards)

IMG_6910.jpg

IMG_6903.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
    • Yes. Autos typically work from the speed sensor on the pinion shaft of the diff. I also think that even if you have a proper speed sensor for the bog manual in the manual box, that the signal it outputs is not compatible with the auto dash anyway. You should consult that manual (the book, not the gearbox).
    • And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
×
×
  • Create New...