Jump to content
SAU Community

R32 Gtr Turbo's, R32 Gtr Exhaust Cat Back, Stainless 3"

sebastion
 Share

Recommended Posts

sebastion Proficient

sebastion

Posted
Posted

hey guys, have a few spare parts that we need gone...

pair of r32 gtr turbo's, come with everything pictured (bar surrounding items and head)... turbo's are in average condition, some shaft play, to be expected due to their age... not sure of k's, was purchased with some other parts we needed...

$400 with the lines (as pictured) $350 without, also have a pair of O2 sensors, which we can supply for an extra $60...

R32 GTR 3" exhaust, cat back, stainless steel, in good condition, no holes etc... de-cat pipe not included... $350

r32 GTR standard front pipe, with heat sheilding etc-as pictured, in good usable condition... $60

Rb26 polished camshaft covers, highly polished, alot of money went into these, selling cheap at $650

Rb26 polished plenum, highly polished, looks great... also have ported runners internally to smooth flow... $600

located on the far north coast NSW, near lismore, can personally deliver as far up as brisbane at a cost, otherwise aus wide postage is available at buyers expense (for the smaller items). cheers

post-53835-1260696245_thumb.jpg

post-53835-1260696462_thumb.jpg

post-53835-1260696538_thumb.jpg

post-53835-1260696602_thumb.jpg

post-53835-1260696690_thumb.jpg

post-53835-1260696803_thumb.jpg

post-53835-1260696910_thumb.jpg

post-53835-1260696986_thumb.jpg

  • 2 weeks later...
sebastion Proficient

sebastion

Posted
  • Author
Posted

common people, someone must want a decent exhaust... taking reasonable offers, and we can deliver to you if you are close... need the exhaust gone, price drop on turbos to $250 firm...

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

sebastion, or should i say levi/alex

As you are a business/trader you are required to pay trader fee's to advertise your goods here.

Details can be found here:

http://www.skylinesaustralia.com/forums/Bu...se-t294953.html

Premium traders are currently full.

Also, do not troll the WTB section/send PM's to people about goods, this still counts as trading.

Thanks.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...