Jump to content
SAU Community

Rb25det Running Crazy Rich

NA_Goodness

By NA_Goodness,
in Engines & Forced Induction

 Share

Recommended Posts

NA_Goodness Grand Master

NA_Goodness

Posted
Posted

Hey guys, went to an SAUWA Dyno Day today, and the dyno print out showed some interesting results. The A/F ratio dived down below 10:1 and sat on the bottom of the graph for he magority of the run. The owner of the workshop had a look at it and reckons something is seriously wrong with it. Would explain the fuel usage recently. Any ideas what might be causing it? I would take it back to the workshop, but I dont trust them touching my car. No offence to them.

The car is a 1996 R33 GTSt with high flow turbo, full exhaust, intercooler, remapped ECU, stock BOV, Spitfire coil packs, 18psi through a Greddy Profec B Spec II.

Any ideas?

Rhys

Link to comment
https://www.sau.com.au/forums/topic/300039-rb25det-running-crazy-rich/
Share on other sites
Pal Veteran

Pal

Posted
Posted

Hey Ryhs,

I had the same problem where due to the heat today at the dyno (38degree day) my power fc chucked a whole heap of fuel in to stop it pinging and i ended up 60hp less than normal and afrs in the 10's instead of the normal 12's

NA_Goodness Grand Master

NA_Goodness

Posted
  • Author
Posted

Hmmm. So you reckon getting it checked on another dyno when its cooler? Like I said before, I'd buy a car and parts off Alistair, but I wouldnt trust him with my car. Possible he's trying to scam money off new customers?

Traitor7 Enthusiast

Traitor7

Posted
Posted
Hmmm. So you reckon getting it checked on another dyno when its cooler? Like I said before, I'd buy a car and parts off Alistair, but I wouldnt trust him with my car. Possible he's trying to scam money off new customers?

Take it to another workshop to get it dyno'd that you do trust and see if the readings are the same?

Do it on a day without so much heat..

R32 Driver Mentor

R32 Driver

Posted
Posted

Hey Rhys,

My mate went to the same dyno day and he pulled a low 300 when it normally pulls 400hp

his was tuned by autoworx so i dont think its the dyno reading low, his AFR also dropped down into 10s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...