Jump to content
SAU Community

Recommended Posts

Hi Skyline freaks....Here I have found a very cheap R32 GTS-T ( $5000 ) ONLY Would make a great Drift Project and Its Very CheeeeeP Its item 270498671522 on E-bay and Finishes today

http://cgi.ebay.com.au/Nissan-Skyline-R32-...=item3efafa2ba2

Edited by importacar
Link to comment
https://www.sau.com.au/forums/topic/300360-cheap-r32-on-ebay/
Share on other sites

Hi Skyline freaks....Here I have found a very cheap R32 GTS-T ( $5000 ) ONLY Would make a great Drift Project and Its Very CheeeeeP Its item 270498671522 on E-bay and Finishes today

http://cgi.ebay.com.au/Nissan-Skyline-R32-...=item3efafa2ba2

where to start... this is a wanted to buy section... your also not allowed to put links to your items on other sites... and since your a newbie, you should know this as you should have read the rules...

not really cheap dude, you can find 32's that cheap locally most weeks

+1 for that, r32's that arn't in very good condition sell for that price easily every day...

Hi Skyline freaks....Here I have found a very cheap R32 GTS-T ( $5000 ) ONLY Would make a great Drift Project and Its Very CheeeeeP Its item 270498671522 on E-bay and Finishes today

http://cgi.ebay.com.au/Nissan-Skyline-R32-...=item3efafa2ba2

Hi.

As you are a business, you must PAY to advertise on this site.

Please do not start another thread until such as a time as you are paid up, failure to do so will result in suspension/loss of your account

Details are in the business traders section

Thanks

Admin.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...