Jump to content
SAU Community

It's Back, My Amateur Pics :)

stageaharts

By stageaharts,
in Four Door Family & Wagoneers

 Share

Recommended Posts

stageaharts Community Regular

stageaharts

Posted
Posted

Well, it's back and it sure as hell looks better than ever :)

Stag2.jpg

Stag1.jpg

Stag3.jpg

Stag4.jpg

The rear bar is still to go on (Insurance not paying for the fit/paint in the end.), when that goes on (Post New Year) I will have the side strips painted. Fit and finish of both the bar and sides is excellent, a big thank you to Casanova Crash, they did a stand up job. Also waiting on the decals for the TE37's (Blue/White), should set the wheels off a bit. Interior is schmick, treated the leather after not having the car for 4 months, it came up a dream. Sound system cranks with 3 amps, 2 pairs of Type R splits and a Pioneer 12" sub, but I will be treating myself to a new Alpine Type R sub for chrissy I think :)

Car drives beautifully post service with Kidafa, new plugs, filter, oil. Disappointed that the mechanic put a new service interval placard up (+5000kms) without dropping the oil, I'm desperately hoping that the engine hasn't suffered because of it. I will be dropping the oil again within a few weeks to make sure the oil is free of sh!t.

So exterior/interior is all but done for the time being, once the engine work has been performed I will look at upgrading to 18" TE37's, but that should be about it :).

it's so f'n good to have my car back... 14 months. F that.

harts. :D

Link to comment
https://www.sau.com.au/forums/topic/300651-its-back-my-amateur-pics/
Share on other sites
DaveB Mentor

DaveB

Posted
Posted (edited)

whoa, NIIICE. geez if u saw pic #1 bearing down on you in your rear-view mirror you'd be a little surprised lol looks awesome. Haven't seen the black bonnet done before either. Interesting.

Edited by DaveB
stageaharts Community Regular

stageaharts

Posted
  • Author
Posted

Thanks guys!

Black bonnet was a compromise, wanted carbon but didn't want too much heat from the powers that be, plus the painting of the wheels was meant to be in theme, I'm stoked with with the overall result. The bonnet isn't gloss by the way, it's satin (as are the wheels) to add a bit more contrast. It was all sort of designed around a less showy (read: airbrushed, chrome wheels, neons etc etc) more serious streeter ideal. So many of my friends with S15's and the like came down on me for painting the wheels black hehe, can't wait to blow them off and explain the performance differences between TE37's and Lenso D1R's :banana:

I have an awesome pic of a white jap stagea drifting with a black bonnet/takero's kit/black wheels, i'll post it up sometime (it was 1/2 the inspiration for the bonnet turning black and overall colour scheme)

Raysboostin Mentor

Raysboostin

Posted
Posted
Thanks guys!

Black bonnet was a compromise, wanted carbon but didn't want too much heat from the powers that be, plus the painting of the wheels was meant to be in theme, I'm stoked with with the overall result. The bonnet isn't gloss by the way, it's satin (as are the wheels) to add a bit more contrast. It was all sort of designed around a less showy (read: airbrushed, chrome wheels, neons etc etc) more serious streeter ideal. So many of my friends with S15's and the like came down on me for painting the wheels black hehe, can't wait to blow them off and explain the performance differences between TE37's and Lenso D1R's :banana:

I have an awesome pic of a white jap stagea drifting with a black bonnet/takero's kit/black wheels, i'll post it up sometime (it was 1/2 the inspiration for the bonnet turning black and overall colour scheme)

im not a fan of black bonnets, but thats not bad it kinda grows on ya. but i think u'll get just as much heat from the fuzz as u would with a carbon one. cos they will think its carbon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...