Jump to content
SAU Community

Recommended Posts

there nothing special . thay are a bit harder to fit than factory ones but do fit fine . they look taky shiny . not cool clear . if that makes any sense . and they stick out about 3 times further than standard ones .

there nothing special . thay are a bit harder to fit than factory ones but do fit fine . they look taky shiny . not cool clear . if that makes any sense . and they stick out about 3 times further than standard ones .

are you sure you're talking about the same thing? :) they are the same as the standard ones, they don't stick out any further and they use the exact same mounting system :bunny:

Trawled through his website but he seems to have front indicators for evrything else R34, S13, S14 etc but not Stagea. He's just a couple of km down the road from me so i will go and see him tomorrow and ask him if he can get some in.

:) my apologies. Upon closer inspection it's just a giant orange globe, not orange plastic on the ends.

for my next question, anyone know where i can get a new set that aren't faded/dull?

Edited by Cheddar
  • 3 weeks later...
are you sure you're talking about the same thing? :P they are the same as the standard ones, they don't stick out any further and they use the exact same mounting system :bunny:

yeah thats what have . they are harder to mount beacuse they are shit hard plastic not nice plastic like factory ones . and by stick out i mean the lense has a lot more of a bluge in it . the factory lense is almost flat those ones are about 12 mm deep (outwards)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...