Jump to content
SAU Community

Recommended Posts

Looking for some work meisters , SSR proffesors or any SIMMONS wheels 17 or 18 for GTR R32. Thanks post-68456-1261304188_thumb.jpg :)

Edited by blingtr

not too overboard, heres a pic... the dish isn't polished here, but when it is it comes out soooooooo shiny

10319_103735799639914_100000104843842_85215_1181458_n.jpg

Edited by DMIN8R

check my topics i have some riversides that look near identical to fr17's in a 9.5 inch wide they have more dish than the pics show and enkei rpo1's the riversides are perfect all over the enkeis need painting if youre fussy

will do a better price for a quick sale... postage is no drama

Edited by WHITE R32
not too overboard, heres a pic... the dish isn't polished here, but when it is it comes out soooooooo shiny

10319_103735799639914_100000104843842_85215_1181458_n.jpg

cheers for the pic , love your black gtr (rare) but will give your rims a miss . thanks

i've got a set of 18x9.5+15 R-disk (clears brembos) vs-kf in shadow chrome, not really looking to sell but will for the right price

in adelaide too, pm me for pics

i've got a set of 18x9.5+15 R-disk (clears brembos) vs-kf in shadow chrome, not really looking to sell but will for the right price

in adelaide too, pm me for pics

Dude the dish isnt deep enough l.o.l. there crayzzzzzzzzzzeeeeeeeee. a bit to deep for me . MEGA DEEP

Dude the dish isnt deep enough l.o.l. there crayzzzzzzzzzzeeeeeeeee. a bit to deep for me . MEGA DEEP

it's not that deep lol only about 85mm or so. specs are perfect for r32 gt-r

this is one of the fronts on my stagea

100_0613.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...