Jump to content
SAU Community

Recommended Posts

Hi Guys,

Usual story - baby on the way, need bigger house, toys must go. My Nur is 1 of only 250 ever built. It was purchased brand new by a Kiwi who had it sent directly to Mines from factory for tuning. Including the original cost of the car, it's had NZ$350k spent on it and arguably sports the best of everything.

http://www.trademe.co.nz/Browse/Listing.aspx?id=259634078

Will be very sorry to see it go. I can be contacted via [email protected] or +64 21 227 4001

Cheers

Phil

115k landed registered and complied in australia?

mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

Edited by JesseJames
That's correct guys - price is AUD$115k.

Thanks

Phil

thats an absolute bargin mate... wish we had the money... and also for those that may not know, he is selling the car with its original NUR motor (it has a new one in it), so you get a complete collector car and another engine...

good luck with it mate, should have no issues

mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

wat did u just dribble man .

mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

I recently had an Aussie GTR enthusiast who was wanting to buy the Nur look into these costs and he concluded that all up it would be an additional AUD$20k.

Also, easy enough to minimise the duty obligations.

thats an absolute bargin mate... wish we had the money... and also for those that may not know, he is selling the car with its original NUR motor (it has a new one in it), so you get a complete collector car and another engine...

good luck with it mate, should have no issues

Thanks mate. Not only is it the rarest of the Nurs, but it's also been tuned by the legendary Mines company in Japan. For me, this just adds to its collectibility.

Considering the cost of a new R35, it is a bargin. All the money has been spent so the car is like new. Given its rare and collectable nature, it will likely appreciate over the years and will always appeal to the global car enthusiast market.

As you can see in the following link, a tuned GTR (R33 or R34) can still walk a new R35 around the track and my Nur has over 700hp.

Cheers

Phil

As you can see in the following link, a tuned GTR (R33 or R34) can still walk a new R35 around the track and my Nur has over 700hp.

prob a stock R35

*Xmas bump for a nice nur*

  • 2 weeks later...
prob a stock R35

*Xmas bump for a nice nur*

Thanks. For those interested, I took a few clips of my GTR recently. You can check them out here.

Enjoy

This was a once off - the only time I've ever launched it. 0-100 in under 4

http://www.youtube.com/watch?v=-HIBfsP1Fow

  • 1 month later...

Hey guys - baby due any day now. Car has to go to make way for a new family wagon.

Have reduced price from AUD $115 to just $95K!! Just had oil changed also.

Anyone interested, please call on +64 21 227 4001

I think I'd rather chop an arm off than sell that! THE best 34 GTR I've ever seen (these 3 pics below have been my wallpaper(s) for about a year!)

gtr_nur_1.jpg

gtr_nur_2.jpg

gtr_nur_3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...