Jump to content
SAU Community

Recommended Posts

what are the rules for headlight heat range in qld?

i read in a WA topic it was 6000k or less, however 6000k only come in a HID.

does that mean a HID kit of 6000k can be fitted to stock R33 headlight casing?

any help would be greatly appreciated

Link to comment
https://www.sau.com.au/forums/topic/301146-r33-headlight-bulbs/
Share on other sites

hey mate you can have Legally 8000K in any car as long as your HID is ADR Approved , which means the bulbs have a small metal shield on them to prevent your hid's dazzling the other drivers on comming traffic , also ADR approved ballasts are water sealed and have electronic ignitors

my advice is 6400K is the best they give you 2x longer beam then standard 10x better brightness to standard halogen bulbs , to fit HID in R33's use H1 HID kit , GTR Series 3 uses D2S Bulb only as they came factory with HID , same with R34's

Tip :- after hids are installed use mild cut and polish to clean your headlights to get best results

hey mate you can have Legally 8000K in any car as long as your HID is ADR Approved , which means the bulbs have a small metal shield on them to prevent your hid's dazzling the other drivers on comming traffic , also ADR approved ballasts are water sealed and have electronic ignitors

my advice is 6400K is the best they give you 2x longer beam then standard 10x better brightness to standard halogen bulbs , to fit HID in R33's use H1 HID kit , GTR Series 3 uses D2S Bulb only as they came factory with HID , same with R34's

Tip :- after hids are installed use mild cut and polish to clean your headlights to get best results

hey mate

cheers for all that

i remember reading somwhere that the limit was no higher than 6000k?

do you know what brands make adr approved hids to fit a 33?

alot of ebay ones ive heard are actually of quite good quality

hey mate most of the korean made have DOT approval same as the European made ones .. unfortnatly most ebay ones that are made in China arent DOT approved hence they are dirt cheap 70 bucks a set... DOT approved ones come with sheilded wiring , DOT approved AMP connectors, CFC free caps which are enviro friendly , and euro mark approved which gives it a higher spec class then standard xennon factroy items .... if you do buy off ebay buy korean ones thye are better ...

hey mate most of the korean made have DOT approval same as the European made ones .. unfortnatly most ebay ones that are made in China arent DOT approved hence they are dirt cheap 70 bucks a set... DOT approved ones come with sheilded wiring , DOT approved AMP connectors, CFC free caps which are enviro friendly , and euro mark approved which gives it a higher spec class then standard xennon factroy items .... if you do buy off ebay buy korean ones thye are better ...

ah ok,

cheers mate.

am i correct in saying though that if hid's are fitted they need a projector to concentrate the light beam?

or can u put HID's in a car without projectors?

no your car doesnt need projectors at all to have HID , if you get a good quality kit you wont have the on comming traffic dazzel problem , a good kit once installed wont need any adjustments

no your car doesnt need projectors at all to have HID , if you get a good quality kit you wont have the on comming traffic dazzel problem , a good kit once installed wont need any adjustments

hey mate,

thats cleared alot of things up, cheers for all the info?

is there anything else i should know about hid's before i buy and install some?

just one questions, are hid's without a projector legal though? as long as they dont dazzle other drivers?

hey mate try and get HID's with AMP connecters that are plug and play (this means you wont need to modify your headlights or your factory wiring system) , also get 6500K as it gives the best modern look and brightness 8000K onwards arent the brightest (brightness in terms of beam length) , yes you will be legal as long as you have a DOT approved or Euro ISO approved HID as i said previously the cheap chinese ones arent DOT approved usually lasts 3-6 months max ... failing that if you cant get any at all give me a pm i can get you 6500K DOT approved ones for under 250 bucks installed in your 33

hey mate try and get HID's with AMP connecters that are plug and play (this means you wont need to modify your headlights or your factory wiring system) , also get 6500K as it gives the best modern look and brightness 8000K onwards arent the brightest (brightness in terms of beam length) , yes you will be legal as long as you have a DOT approved or Euro ISO approved HID as i said previously the cheap chinese ones arent DOT approved usually lasts 3-6 months max ... failing that if you cant get any at all give me a pm i can get you 6500K DOT approved ones for under 250 bucks installed in your 33

hey mate

cheers for that,

im prob looking at buying some in maybe 3-4 weeks or so.

is installation hard?

i think the main thing is actually making them level to not dazzle people.

  • 2 weeks later...
  • 1 month later...
hey mate on a S2 they are H7..

R33 series 2 fog light bulb = H7?

i tried to look at the casing of the fog light assembly and i saw an H3?

can someone please assure me of the bulb size.. cause im about to change it into HID since winter is already coming..

sorry new to skyline..

tnx..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...