Jump to content
SAU Community

R33 Headlight Bulbs

buckets

By buckets,
in Queensland

 Share

Recommended Posts

buckets Community Regular

buckets

Posted
Posted

what are the rules for headlight heat range in qld?

i read in a WA topic it was 6000k or less, however 6000k only come in a HID.

does that mean a HID kit of 6000k can be fitted to stock R33 headlight casing?

any help would be greatly appreciated

Link to comment
https://www.sau.com.au/forums/topic/301146-r33-headlight-bulbs/
Share on other sites
53XYN Veteran

53XYN

Posted
Posted

hey mate you can have Legally 8000K in any car as long as your HID is ADR Approved , which means the bulbs have a small metal shield on them to prevent your hid's dazzling the other drivers on comming traffic , also ADR approved ballasts are water sealed and have electronic ignitors

my advice is 6400K is the best they give you 2x longer beam then standard 10x better brightness to standard halogen bulbs , to fit HID in R33's use H1 HID kit , GTR Series 3 uses D2S Bulb only as they came factory with HID , same with R34's

Tip :- after hids are installed use mild cut and polish to clean your headlights to get best results

buckets Community Regular

buckets

Posted
  • Author
Posted
hey mate you can have Legally 8000K in any car as long as your HID is ADR Approved , which means the bulbs have a small metal shield on them to prevent your hid's dazzling the other drivers on comming traffic , also ADR approved ballasts are water sealed and have electronic ignitors

my advice is 6400K is the best they give you 2x longer beam then standard 10x better brightness to standard halogen bulbs , to fit HID in R33's use H1 HID kit , GTR Series 3 uses D2S Bulb only as they came factory with HID , same with R34's

Tip :- after hids are installed use mild cut and polish to clean your headlights to get best results

hey mate

cheers for all that

i remember reading somwhere that the limit was no higher than 6000k?

do you know what brands make adr approved hids to fit a 33?

alot of ebay ones ive heard are actually of quite good quality

53XYN Veteran

53XYN

Posted
Posted

hey mate most of the korean made have DOT approval same as the European made ones .. unfortnatly most ebay ones that are made in China arent DOT approved hence they are dirt cheap 70 bucks a set... DOT approved ones come with sheilded wiring , DOT approved AMP connectors, CFC free caps which are enviro friendly , and euro mark approved which gives it a higher spec class then standard xennon factroy items .... if you do buy off ebay buy korean ones thye are better ...

buckets Community Regular

buckets

Posted
  • Author
Posted
hey mate most of the korean made have DOT approval same as the European made ones .. unfortnatly most ebay ones that are made in China arent DOT approved hence they are dirt cheap 70 bucks a set... DOT approved ones come with sheilded wiring , DOT approved AMP connectors, CFC free caps which are enviro friendly , and euro mark approved which gives it a higher spec class then standard xennon factroy items .... if you do buy off ebay buy korean ones thye are better ...

ah ok,

cheers mate.

am i correct in saying though that if hid's are fitted they need a projector to concentrate the light beam?

or can u put HID's in a car without projectors?

53XYN Veteran

53XYN

Posted
Posted

no your car doesnt need projectors at all to have HID , if you get a good quality kit you wont have the on comming traffic dazzel problem , a good kit once installed wont need any adjustments

buckets Community Regular

buckets

Posted
  • Author
Posted
no your car doesnt need projectors at all to have HID , if you get a good quality kit you wont have the on comming traffic dazzel problem , a good kit once installed wont need any adjustments

hey mate,

thats cleared alot of things up, cheers for all the info?

is there anything else i should know about hid's before i buy and install some?

just one questions, are hid's without a projector legal though? as long as they dont dazzle other drivers?

53XYN Veteran

53XYN

Posted
Posted

hey mate try and get HID's with AMP connecters that are plug and play (this means you wont need to modify your headlights or your factory wiring system) , also get 6500K as it gives the best modern look and brightness 8000K onwards arent the brightest (brightness in terms of beam length) , yes you will be legal as long as you have a DOT approved or Euro ISO approved HID as i said previously the cheap chinese ones arent DOT approved usually lasts 3-6 months max ... failing that if you cant get any at all give me a pm i can get you 6500K DOT approved ones for under 250 bucks installed in your 33

buckets Community Regular

buckets

Posted
  • Author
Posted
hey mate try and get HID's with AMP connecters that are plug and play (this means you wont need to modify your headlights or your factory wiring system) , also get 6500K as it gives the best modern look and brightness 8000K onwards arent the brightest (brightness in terms of beam length) , yes you will be legal as long as you have a DOT approved or Euro ISO approved HID as i said previously the cheap chinese ones arent DOT approved usually lasts 3-6 months max ... failing that if you cant get any at all give me a pm i can get you 6500K DOT approved ones for under 250 bucks installed in your 33

hey mate

cheers for that,

im prob looking at buying some in maybe 3-4 weeks or so.

is installation hard?

i think the main thing is actually making them level to not dazzle people.

  • 2 weeks later...
  • 1 month later...
DOHC Contributor

DOHC

Posted
Posted
hey mate on a S2 they are H7..

R33 series 2 fog light bulb = H7?

i tried to look at the casing of the fog light assembly and i saw an H3?

can someone please assure me of the bulb size.. cause im about to change it into HID since winter is already coming..

sorry new to skyline..

tnx..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...