Jump to content
SAU Community

Recommended Posts

Hi All,

As Stated above I am thinking about selling off my White 1994 Toyota Aristo.

The Car was Complied in 2007, and I am the 2nd Owner in Australia (Bought it in August 2008).

It has never had a Boost Controller Installed while In Australia, and has been well maintained. (Serviced every 5000kms with Penrite HPR10).

It gets roughly 550km per Tank with daily suburban driving.

These things are VERY VERY Comfortable to drive and sit in, with lots of space and potential.

They come equipped from Factory with all the Luxury Features found in Lexus' and the Performance Package of a Supra, making it a Luxury 4 Door Supra! :P

It had it's Brake Master Cylinder / ABS Unit Replaced and Brand New Bendix Brake Pads and Brake Fluid on the 18/12/09 and a Full Detail was carried out on the car on 24/12/09. :D

For Sale:

1994 Toyota Aristo JZS147 3.0V

For those who are not familiar with Aristo's,

* 2JZGTE Engine and Auto Gearbox (115xxx)

* Electronic Sunroof

* Electronic Mirrors (At the press of a button they can be heated and/or Fold in for tight parking)

* Motorised Front seats

* Woodgrain Trim

* Heavy Duty Car Mats (Factory Optional Extra)

* 6 Speaker CD Player Stereo System (Front Centre, 4 Doors and 12' Sub)

* ABS and Nitrogen Assisted Braking System

* Traction Control (Able to be turned on and off by pressing a button)

* Cruise Control

* Climate Control Air Conditioning (Front and Rear)

* Power Steering

* Hydraulic Radiator Fan Assembly with Cooler

* White LED Converted Guage Cluster with New Needles

* Timing belt, Idler bearing, Tensioner bearing replaced at 77xxx kms

* 18' Volk Challenge Rims with Brand New Nankang NSII Tyres

* KKR Front Mount Intercooler Kit

* Greddy POD Air Filter and Custom Intake Piping

* New Cam Cover Seals

* New Heater Hoses and Heater Tap

* New Thermostat and Radiator Hoses

* Replaced Radiator (Re-Conditioned)

* Blitz DCIV Turbo Timer

* Replaced Brake Master Cylinder / ABS Unit

** I will update the list If I can think of anything else **

I also have the Following for it (Not Installed)

* Brand New B&M Oil Cooler and Relocation Kit

* Factory Air Box and Intake Duct comes with Brand New Trust Air Filter

* Aftermarket Double DIN Stereo Surround and Wiring Kit to fit Aftermarket Stereo (Plug and Play)

* Aftermarket Single DIN Pocket to suit Stereo Surround (If not Installing Double DIN Stereo)

* Brand New Silver Lightweight Pulley Set

* Brand New 10 Row Oil Cooler (Powersteering Cooler Upgrade)

* Brand New Transmission Cooler Upgrade

* Brand New Blue Adjustable 2JZGTE Cam Gears

* Brand New Black Alloy rear Subframe Bushes

* Brand New Blue T Boost Controller

* Brand New Bonnet and Boot Gas Struts

pb020141.jpgpb020142.jpgpb020144.jpg

pb020145.jpgpb020146l.jpgpb020147.jpg

pb020148.jpgpb020149.jpgpb020150.jpg

pb020151t.jpgpb210171.jpgpb210172.jpg

pb210173z.jpgpb210174.jpgpb210175.jpg

pb210176.jpgpb210177.jpgpb210178.jpg

pb210182.jpgpb210183.jpgpb210184.jpg

pb210185.jpgpb210187.jpgpb210186.jpg

pb210188.jpg

** Pics are from before the detailing! I will post up new pics when I get a chance **

Alternatively, More pics can be found HERE!

Price:

$10,000 Complete As Is with Roadworthy & Rego Transfered (Rego Until OCT 2010)

$11,000 Complete As Is with Roadworthy & Rego Transfered (Rego Until OCT 2010) and ALL the above mentioned Parts that are not installed

Any reasonable offers will be considered.

I will mention that the car needs the Boot Struts Replaced (Can be Supplied) and has minor scratches which can be expected on a second hand car.

Location: Western Suburbs Of Brisbane, QLD

Reply here or Contact me via PM

Regards,

Sherwin

Link to comment
https://www.sau.com.au/forums/topic/301434-white-1994-toyota-aristo/
Share on other sites

Ok people,

I have attached some new pics of the car that I took this morning!

pc220021.jpgpc220022s.jpgpc220023.jpg

pc220024.jpgpc220025.jpgpc220026u.jpg

pc220027.jpgpc220028z.jpgpc220029.jpg

pc220031.jpgpc220030.jpgpc220032.jpg

pc220033.jpg

OR Alternatively, pics can be found HERE!

Regards,

Sherwin

  • 2 weeks later...
ill clean swap you for my r32 skyline pm me if your keen

Hi there,

Thanks for the offer, but at the low price I am really just after CASH!

Regards,

Sherwin

Price:

$ 7,500 - Unrego / No RWC and 17" Rims

There is nothing wrong with the car.. I just simply do not have the time to organise one at the moment. So am negotiable on the price for No Rego and RWC.

$ 9,500 - RWC Supplied

$11,000 - With the following;

* Brand New B&M Oil Cooler and Relocation Kit

* Factory Air Box and Intake Duct comes with Brand New Trust Air Filter

* Aftermarket Double DIN Stereo Surround and Wiring Kit to fit Aftermarket Stereo (Plug and Play)

* Aftermarket Single DIN Pocket to suit Stereo Surround (If not Installing Double DIN Stereo)

* Brand New Silver Lightweight Pulley Set

* Brand New 10 Row Oil Cooler (Powersteering Cooler Upgrade)

* Brand New Transmission Cooler Upgrade

* Brand New Blue Adjustable 2JZGTE Cam Gears

* Brand New Black Alloy rear Subframe Bushes

* Brand New Blue T Boost Controller

* Brand New Bonnet and Boot Gas Struts

Any reasonable offers will be considered.

To Answer A lot of people's questions....

I will only drop the Price of this car from $8,000 (No Rego/ No RWC Price)

IF the buyer is willing to accept either 17" Rims that came with the Car when I bought it or 16" Standard 300ZX Rims.

$8,000 = 18" Volk Racing Rims Included

$7,000 - $7,999 = 17" Weds Farmas DP V11 Rims Included 17" Rims Pics

$6,500 - $6,999 = 16" 300ZX Rims Included

All of the Above Rims Packages come with Road Worthy Tyres already fitted.

Regards,

Sherwin

All it needs for a RWC is to have the Engine Degreased.

I will look into this when I service the car on the weekend. (I am thinking it is due to when the Sump Plug was loose, but will be able to tell once the engine is degreased and wiped down completely.

18" Volks are;

FRONTS:

18x8 + 32

REARS:

18x9 +35

Regards,

Sherwin

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...