Jump to content
SAU Community

Recommended Posts

Genuine Koya Driftek rims-new/never fitted-no scratches,scuffs,etc at all-metallic light gold colour

Bought them wednesday 23/12/09 for $1174 & have original receipt-just got some cheaper 17" rims the same size so these are up for grabs

Multistud rims-will fit either 4 or 5 stud hubs with PCD of either 4 x 114.3 or 5 x 114.3

Two 17"x8" offset is +34

Two 17"x9" offset is +35

They fit inside r33 gtst gaurds & clear the front turbo brakes without spacers-i had a 2nd hand pair of these awhile ago

Will definately fit Nissan r32/r33/r34 skyline's & silvia's with 5 stud hubs

Should fit any car with 4 or 5 stud hubs with PCD of 114.3

Can send with Australia Post or Courier[TNT probably]at buyers expense

Pickup from Maroochydore Sunshine Coast QLD 4558

If sent they'll be packed in original carboard boxes with extra thick foam & cardboard to protect the outside of rim/paint

Might trade for a set of 18's that would suit a r33 gtst with 5 stud hubs/PCD 114.3

Something like Lenso D1R's or the Koya copies of Volk GT-C's

I'm chasing $950 serious offers considered

post-59075-1262325479_thumb.jpg post-59075-1262325671_thumb.jpg

post-59075-1262325753_thumb.jpg post-59075-1262325815_thumb.jpg post-59075-1262325860_thumb.jpg

post-59075-1262325900_thumb.jpg post-59075-1262325986_thumb.jpg

From sunshine coast 4558 to adelaide 5093 with aussie post is approx. $140

A courier service would probably charge twice as much

Dimensions...55cm x 30cm x 55cm

approx 10 Kg's each

From sunshine coast 4558 to adelaide 7306 will be approx. $200

according the to aussie post website

I'd take them in & get it checked before sending

You could get a qoute frome a courier service like TNT but it will probably be a lot more

Dimensions of eack box...55cm x 30cm x 55cm

Weighs approx 10 Kg's each

Also have these to sell alltogether...

VGC dark bronze alloy JDM "Black Racing" Pro N1 Jap rims-thin six spoke-just a few very light scratches & one rim has some minor gutter rash in a few spots,not all the way round lip of rim-no centre caps

Rare cause they stopped making these years ago apparently

Two 17x8 +38

Two 17x9 +38

Two brand new/unused Federal 595 performance tyres-both 255/40/17 [cost me $180 each]

Perfect size for the rear of skyline r33 gtst's

And two used Sumitomo performance tyres both-235/45/17

Both with 85 percent tread

Perfect size for the front of skyline r33 gtst's

One is evenly worn

One is slighty more worn on one side

No buckles,flatspots or cracks

$1200 for rims & 4 tyres

post-59075-1263017717_thumb.jpg

I'll consider trades for either set of rims im selling

After 18" rims in VGC with at least 50 percent tread on tyres

that would suit a r33 gtst with 5 stud hubs/PCD 114.3

Something like Lenso D1R's or the Koya copies of Volk GT-C's

I'll chuck in a set of new/never fitted "KKR" Forged Aluminium wheelnuts with the Drifteks or other rims I'm selling

...if sold today!

1.25mm pitch-only weigh 400 grams-about 1/3 the weight of standard ones

Dark grey/graphite colour

Perfect size for Drifteks

Paid $80-will sell wheelnuts for $60

post-59075-1263338625_thumb.jpg post-59075-1263338941_thumb.jpg post-59075-1263339002_thumb.jpg

post-59075-1263339073_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
×
×
  • Create New...