Jump to content
SAU Community

Water Methanol Cooling Mist Setup Suit Skyline R33

FOOLBOOST
 Share

Recommended Posts

FOOLBOOST Experienced

FOOLBOOST

Posted
Posted

Water Methanol Cooling mist setup suit skyline r33 in excellent condition, kit is wired up ready to bolt in

Located in Adelaide, local pickup or will post

$400

Includes the following:

Modified r33 skyline washer tank

BLACK 150 psi pump

3 meters high pressure hose

Brass fittings

World class brass checkvave rated at 600 PSI and over 300 F

Injector that installs from the OUTSIDE of the pipe

Injector holder

Relay

Relay Harness

Fuse

Fuse Holder

boost switch adjustable from 1-25 psi.

various electrical connectors

Also comes with new spare tank and fuses/relays

post-31991-1262506288_thumb.jpg post-31991-1262506305_thumb.jpg post-31991-1262506316_thumb.jpg

post-31991-1262506324_thumb.jpg post-31991-1262506331_thumb.jpg

FOOLBOOST Experienced

FOOLBOOST

Posted
  • Author
Posted
Hey mate, does this include EVERYTHING required to run waterspray?

Is the amount of spray adjustible? What power/airflow is it for / was it used on?

Cheers

Yer everything, just hook up power from ignition and an earth and ur away its boost adjustable or switch depending on what you want.

SKiT_R31 Experienced

SKiT_R31

Posted
Posted

yeah i understand the boost adjustible, but what size is the water nozzle, i.e. how much water does it spray? i.e. heaps, for a 300kW setup, or medium for ~ 200kW setup, etc...

driftmeisterRSA Newbie

driftmeisterRSA

Posted
Posted

hi Sir

id be keen to take the setup 2 questions :)

#1: can i make it work on a CA18DET and a SR20DET

#2:will you ship to Cape Town South Africa

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...