Jump to content
SAU Community

Recommended Posts

for sale pickup ipswich Qld 0400 328786

roh 3piece 19x7.5" 30 offset $1000

rays 3piece 17x8 & 9's 30 offset 4/5stud $1000

work emotion 15x6.5 19offset near new tires $500

enkie 3piece light weight 15x6.5 19offset $600 (no pics atm)

dr30rs factory 15x6" $400

r31 ti 15x6" with caps $100

z31 15x6.5" with caps/nuts $100

r31 silo with half tires and caps $150 (no pic atm)

sorry bout pic quality haha..........

GetAttachmentaspx.jpg

rays1.jpg

rays2.jpg

work.jpg

dr30rs.jpg

DSC01250.jpg

DSC02045-1.jpg

jon.

Link to comment
https://www.sau.com.au/forums/topic/303137-fs-qld-wheels-and-more-wheels/
Share on other sites

  • 1 year later...

First:

Look at the date this was posted.

Second:

Call Jon, see if they are still available.

Third:

For R31 Skylines, there is a very informative site called http://motamota.r31skylineclub.com/

and then go to http://motamota.r31skylineclub.com/index.php?board=11.0

R31 info can still be on this current forum, but it will take alot longer to get replies!

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...