Jump to content
SAU Community

Internet In Narre Warren


Recommended Posts

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

INASNT I live in Berwick and have IINET ADSL 512kbit, 20gig per month for $79.95 per month (not bad at all, good pings as well)

My mate lives in Narre Warren Sth and has Internode 1500mbit unlimited and swears by it, he used to work for Connect in melbourne and knows his sh%t, Senior Tech. He reckons the network is heaps better as well.

A few estates around this area have Optarse cable but not many

optarse is ghey... internode's alright but dart is the bomb.

That house looks exactly like one that my mate lives in (down tot he bar n billiards table) in Dingley Village. I'm guessing it was a predesigned style or sumfin?

  • 4 weeks later...

anything except an NB1300 or NB1200, stick to D-Link for most things like filters etc, or if you can get your hands on an ASUS hub/modem.

At 512 you won't notice any difference in the equipment you use, only if you start goin to higher speeds. (I've got 512 and tried about 4 different modems with and without routers)

Stick with D-Link, good price for a decent enough product. Something like a DSL-504 $254.17 (if you've got multiple computers) or a DSL-200 $132.09 for a single connection. Check www.instantit.com.au.

Any type of filter is fine, as long as it's for ADSL. InstantIT is quoting $14.00 for a filter, I'm sure I got them cheaper than that...

I'll have to put in a plug for Internode as well... They've got great service, excellent network speed/pings albeit for a couple of dollars extra than the cheapest of providers (you do get what you pay for in the broadband arena). There must be an echo in here (Whirlpool is your friend!) - they just completed their survey too which gives a pretty good breakdown of the current broadband scene.

not necessarily some larger ISP have boxes at exchanges in metro areas and use this. There's even an ISP in rural adelaide offering ADSL where testra don't by setting up secondhand US boxes (since the US has a shiteload of ADSL and is years ahead of us)

... most of the problems with telstra are their ****ed up authentication and mail servers. While most resell the Telstra bottom layer, there are quite a few out there that have their own servers. THOSE are the ISP you wanna go for. I had ADSL on telstra for like a year and it was constantly ****ed up, couldn't log in, servers were down, ****ing rubbish. THEN after that I switched to Netspace.. not a problem, 10 times better.. and when i switched to my router setup permanently connected it had like an up-time of 3 months! 3 months ON permannetly conneted. Telstra could never match that with their servers.

It depends whether the ISP is a layer2 provider or whatever, most still use the bandwidth of Telstra, but the rest of the system is their own..

anyhow...www.whirlpool.net.au - u can learn everything u ever want to know there..

With the "self install" yeah.. it's a doddle to install. .plug modem into filter and then phone line, run the install cd, enter account details and done

If you want to get fancy and have laptops or whatever, you might be best off buying a wireless router or wirelesss router/dsl modem of your own - that way you can just wireless throughout the house to get on the net.

yeah, but imagine being able to beam stuff straight from your PC to your xbox and through your stereo to stream mp3, wma tracks, downloaded movies and whatever else on demand 3 rooms away :) Putting a CD phsyically into a CD player is so passe' man :)

You don't want messy cables running around :)

yeah, but imagine being able to beam stuff straight from your PC to your xbox and through your stereo to stream mp3, wma tracks, downloaded movies and whatever else on demand 3 rooms away :) Putting a CD phsyically into a CD player is so passe' man :)

You don't want messy cables running around :)

I aint that big of a nerd :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...