Jump to content
SAU Community

Recommended Posts

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

Hi, just to confirm these plenums are a direct bolt on and everything is included in the kit?

That's correct - a complete bolt-on including an adapter for your OEM throttle body!

  • 1 month later...

To start of 2011 - FREE P&H!

Check out the feedback; it's the real deal no problem RB25 plenum!

I've heard of alot of these manifolds leaking or needing to be pressure tested, or otherwise modified to fit perfectly before install. Do I need to check it out and test it thoroughly, or would it be right to install straight up?

I've heard of alot of these manifolds leaking or needing to be pressure tested, or otherwise modified to fit perfectly before install. Do I need to check it out and test it thoroughly, or would it be right to install straight up?

Yeah there are a lot of poorly manufactured plenums out there - but after successfully selling these for over 4 years now we can proudly say these are not one of them.

It is cast alluminium so professional installation is recommended.

- Brendan

Sorry to be a pain, i've just been reading up alot on the greddy-copy plenums. So most seem to be okay if you shave/machine the surface where the gasket goes to make sure it's fully flat. Has that already been done to these, or are you sure it's perfectly flat?

I'm sorry if that's just a re-wording of the last question i asked, i just really want to make sure i get this done right first time, without having to remove it after fitting to get it machined or whatever :)

Sorry to be a pain, i've just been reading up alot on the greddy-copy plenums. So most seem to be okay if you shave/machine the surface where the gasket goes to make sure it's fully flat. Has that already been done to these, or are you sure it's perfectly flat?

I'm sorry if that's just a re-wording of the last question i asked, i just really want to make sure i get this done right first time, without having to remove it after fitting to get it machined or whatever :)

Hi mate,

Happy to help - this plenum was not machined or modified in any way just a good gasket was used.

- Brendan

So should I order a factory nissan gasket or something else?

This customer used his original one from what I have been told so it really depends on the condition of the one you have now.

- Brendan

  • 3 weeks later...

Hi,

I bought a set of injectors with an after marked fule rail, and its just to big to fit under the standard plenum and the injectores are now top feed instead of side feed,

they fit into a standard ser2 1996 skyline besides the clearance from the standard plenum.. so i would assume they would fit fine into ur plenum..?

so u can fit the standard throttle body up to ur plenum..? and were dose the idol solonoid from the back of the standard plenem mout on urs..??

and last but not least do u sell these in a raw finish or black..??

Thanx for you help..

Hi,

I bought a set of injectors with an after marked fule rail, and its just to big to fit under the standard plenum and the injectores are now top feed instead of side feed,

they fit into a standard ser2 1996 skyline besides the clearance from the standard plenum.. so i would assume they would fit fine into ur plenum..?

so u can fit the standard throttle body up to ur plenum..? and were dose the idol solonoid from the back of the standard plenem mout on urs..??

and last but not least do u sell these in a raw finish or black..??

Thanx for you help..

Hi,

In terms of the injectors you would need to test them yourself to check for fitment - our plenum does accept our own top feed style fuel rail so it should accept yours as well.

Yes - standard throttle body can be used with the adaptor included,

There is a host of connection points on the rear of the plenum to accommodated for all the correct wiring ect.

We do stock them in a plain cast aluminium finish.

We can also offer installation instructions if required.

Cheers,

Brendan

  • 2 months later...
  • 1 month later...

Hi mate,

The fuel rail takes 10.5-11mm top feed injectors (ie. GTR) rather then your OEM side feed injectors - they basically flow more fuel.

Of course the CNC machined purple rail also look great once installed.

- Brendan

  • 1 month later...
  • 3 months later...

Hi been looking around at a few of these.

i have a rb25 in my r32 would i have to change anything at all like the throttle cable?

and what is your price at the moment with postage to NT 0810

Please reply via pm thanks

  • 3 weeks later...



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...