Jump to content
SAU Community

Recommended Posts

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

Hi, just to confirm these plenums are a direct bolt on and everything is included in the kit?

That's correct - a complete bolt-on including an adapter for your OEM throttle body!

  • 1 month later...

To start of 2011 - FREE P&H!

Check out the feedback; it's the real deal no problem RB25 plenum!

I've heard of alot of these manifolds leaking or needing to be pressure tested, or otherwise modified to fit perfectly before install. Do I need to check it out and test it thoroughly, or would it be right to install straight up?

I've heard of alot of these manifolds leaking or needing to be pressure tested, or otherwise modified to fit perfectly before install. Do I need to check it out and test it thoroughly, or would it be right to install straight up?

Yeah there are a lot of poorly manufactured plenums out there - but after successfully selling these for over 4 years now we can proudly say these are not one of them.

It is cast alluminium so professional installation is recommended.

- Brendan

Sorry to be a pain, i've just been reading up alot on the greddy-copy plenums. So most seem to be okay if you shave/machine the surface where the gasket goes to make sure it's fully flat. Has that already been done to these, or are you sure it's perfectly flat?

I'm sorry if that's just a re-wording of the last question i asked, i just really want to make sure i get this done right first time, without having to remove it after fitting to get it machined or whatever :)

Sorry to be a pain, i've just been reading up alot on the greddy-copy plenums. So most seem to be okay if you shave/machine the surface where the gasket goes to make sure it's fully flat. Has that already been done to these, or are you sure it's perfectly flat?

I'm sorry if that's just a re-wording of the last question i asked, i just really want to make sure i get this done right first time, without having to remove it after fitting to get it machined or whatever :)

Hi mate,

Happy to help - this plenum was not machined or modified in any way just a good gasket was used.

- Brendan

So should I order a factory nissan gasket or something else?

This customer used his original one from what I have been told so it really depends on the condition of the one you have now.

- Brendan

  • 3 weeks later...

Hi,

I bought a set of injectors with an after marked fule rail, and its just to big to fit under the standard plenum and the injectores are now top feed instead of side feed,

they fit into a standard ser2 1996 skyline besides the clearance from the standard plenum.. so i would assume they would fit fine into ur plenum..?

so u can fit the standard throttle body up to ur plenum..? and were dose the idol solonoid from the back of the standard plenem mout on urs..??

and last but not least do u sell these in a raw finish or black..??

Thanx for you help..

Hi,

I bought a set of injectors with an after marked fule rail, and its just to big to fit under the standard plenum and the injectores are now top feed instead of side feed,

they fit into a standard ser2 1996 skyline besides the clearance from the standard plenum.. so i would assume they would fit fine into ur plenum..?

so u can fit the standard throttle body up to ur plenum..? and were dose the idol solonoid from the back of the standard plenem mout on urs..??

and last but not least do u sell these in a raw finish or black..??

Thanx for you help..

Hi,

In terms of the injectors you would need to test them yourself to check for fitment - our plenum does accept our own top feed style fuel rail so it should accept yours as well.

Yes - standard throttle body can be used with the adaptor included,

There is a host of connection points on the rear of the plenum to accommodated for all the correct wiring ect.

We do stock them in a plain cast aluminium finish.

We can also offer installation instructions if required.

Cheers,

Brendan

  • 2 months later...
  • 1 month later...

Hi mate,

The fuel rail takes 10.5-11mm top feed injectors (ie. GTR) rather then your OEM side feed injectors - they basically flow more fuel.

Of course the CNC machined purple rail also look great once installed.

- Brendan

  • 1 month later...
  • 3 months later...

Hi been looking around at a few of these.

i have a rb25 in my r32 would i have to change anything at all like the throttle cable?

and what is your price at the moment with postage to NT 0810

Please reply via pm thanks

  • 3 weeks later...



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...