How To Replace R32 Gtr Dash?

[GTRAAH]

IS there any tutorials around on how to replace a R32 GTR dash board? And GTS and GTR dash will fit the same right?

[payback21]

Yes they are the same and they will interchange.

Tutorial? Do it yrself man. Its easy as. Just take note of what you remove and were it goes. You cant go wrong.

[GTRAAH]

yeh you might be right... i just dont wanna get stuck somewhere ... do i have to take steering wheel off? and how does it come off do i need a special tool

[ceedub]

I took the wheel off, as it just makes it easier to work in there.

just undo the screws inside the surround, I think you also need to remove or loosen the plastic front panel, can't remember now as it was a while ago I did it.

It isn't hard, just take your time doing it. as you start to pry it appart you'll find all the other conectors and screws that you didn't see before.

[R.3.2.G.T.R]

yeh you might be right... i just dont wanna get stuck somewhere ... do i have to take steering wheel off? and how does it come off do i need a special tool

Just get a thin flat screwdriver to gently pop out ur horn, then use 21mm

socket to loosen the bolt, don't remove it completely, now grab steering

at 3 n 9 and start rocking it side to side till it comes loose, disconnect plugs n presto