Jump to content
SAU Community

Recommended Posts

Well time has come to sell my car as I'm looking at moving to QLD, I am interested in swaps and cash adjustment my way, Looking at $27,000 o.n.o in no rush to sell, I dont really care if you think the price is to high either have been watching a few S15's come onto the market with less mods for this price. All performance mods where installed at SPG in Hobart, Car get's serviced every 4,000km's at east brook automotive in old Tudor in prospect, Car has just over 100,xxx km's on it will get exact amount when i can. Car is always run on BP ultimate :P Car has been very well looked after while in my possession, cleaned most weekends, The interior is very clean on this car and it get's heaps of looks. Car is very quick as some people can vouch has not been drifted etc. Front bar has a few marks where I was coming out of a drive way, also rear bar has like 3 little cracks it in around the exhaust. If you need to know anything else just ask, PM. Will to drive car to mainland to meet buyer if needed. Well here are a few details of the car

Car as follows

1999 Type R JDM

6 speed Manual

Suspension/Breaks

Nismo Front strut brace

Rear strut brace

Nismo struts

Nismo rear Camber arms

Slotted DBA Rotors

Engine bay

POWER FC D-JETRO

GKTECH Dump pipe

X-Force front pipe

X-Force high flow cat

X-Force Cat back

GTR Intercooler

Turbo tech Boost Controller

Apexi POD

Custom airbox

Blitz hot pipe

GKTECH Dump pipe

Braided oil line

Bosch 040

Greedy induction pipe

Trust T518z turbo

Tune agent manifold

Nismo 740cc Injectors

Nismo Super Coppermix twin plate clutch

Nismo Lightened flywheel

Top stage carbon fibre ABS unit cover

Exterior

20 Inch Koya R1 GT's

Full Pearl White Respray

Rolled Front Guards

Shaved rear boot

Debadged

Flared Rear Guards

M-Sports front bar

Uras rear bar

Uras side skirts

Fibreglass vented bonnet

Tinted windows

Xenon white Headlight bulbs

Smoked Black rear taillights

Smoked Black Side guard indicators

Interior

DRiFT Gear Knob

Leather boot

Full Alarm System with remote start

Silvia floor mats

Sound system

Pioneer DVD 7inch in-dash Touch screen

Polk Audio Splits

Type R coaxils

Kenwood 4 Channel Amp

Dyna mat rear parcel shelf

SDC10109.jpg

SDC10112.jpg

SDC10106.jpg

SDC10110.jpg

SDC10116.jpg

SDC10017.jpg

SDC10005.jpg

SDC10014-Copy.jpg

Link to comment
https://www.sau.com.au/forums/topic/304058-s15-type-r-jdm/
Share on other sites

  • 2 weeks later...

already had a R34 but all offers are considered really looking for money but if you willing to put money on top that would be ok, but do need fair bit of money so I can make the move. PM me with your best offer

Thanks

Edited by ian_and1
Link to comment
https://www.sau.com.au/forums/topic/304058-s15-type-r-jdm/#findComment-5058418
Share on other sites

Hey mate, don't suppose your interested in a swap for a supra, making about 350rwkW, yet to be dynoed, nearly $15k in receipts, nothing dodgy, got the car cheap and fixed it up off a mate who hit financial troubles building the car, haha.

Straights swap ill just keep my recaros cause im after 28K for mine let me know if your interested.

Also wouldnt mind keeping my rims as they have no rubber just put on them, so ill keep my 18's you can keep the 20's? let me know, same boat as you, no rush.

Link to comment
https://www.sau.com.au/forums/topic/304058-s15-type-r-jdm/#findComment-5064006
Share on other sites

  • 3 weeks later...
hey mate PM me details and pics

Hey mate I dont have enough posts to send PM's if your still interested PM me at [email protected] or call me on 0439 318 110

Car is currently getting put back to factory kit and sprayed but will come with everything spare that I have.

Needs a tune too, its been driven to the shops twice in about 6 months due to loss of license, ha.

Link to comment
https://www.sau.com.au/forums/topic/304058-s15-type-r-jdm/#findComment-5104360
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...