Jump to content
SAU Community

Eoi: 94 Silver R32 Gtr, Featured Hpi Issue 110

GTR 94

By GTR 94,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

GTR 94 Mentor

GTR 94

Posted
Posted

ok guys im currently thinking about selling my pride and joy as i think ive had my time with her. ive owned the car since December 04 when it had 94,000kms and completely stock till what it is now and has 130,000kms.

there are a few issues to note with the car!

- the engine is completely dis assembled but buyer will be given all parts required to be put together (reason for dis assembley was more work done to the head it now has 1mm oversize valves and more porting)

- the diff needs attention beginning to wind

- 3rd to 4th syncro in the gearbox has pretty much had it too, still drives fine but is a lil crunchy but i do have a full os gearset that could possibly be sold with the car depending on buyer

mods include:

INTERNALS

Aries Forged Pistons

Crower Rods

ARP Mains studs

ACL Bearings

R33 GTR crank

HEAD

ARP Head Studs

Tomie adjustable cam pulley Inlet

Tomie adjustable cam pulley Exhaust

Tomie Pro Cam Inlet

Tomie Pro Cam Exhaust

Tomie type C Valve Springs

INJECTION

Rochester 1000cc injectors

HKS Fuel Rail

Aeromotive fuel reg

Advan surge tank

Twin bosch 044 pumps

One bosch 040 in tank

Earls fittings

Greddy Plenum

TURBO SETUP

HKS T51R SPL BB

HKS manifold

HKS 60mm wastegate

Trust 4inch cooler

Trust piping kit

4 inch custom stainless dump from turbo to the cat

IGNITION

Autronic sm4

CDI 500R

Battery relocated to the boot

Other engine accessories/detailing

ARC air diffuser

HKS 51R funnel

Greddy oversized pully kit

Trust oil pump

Trust sump extension

Trust radiator

Ross tuff bond harmonic balancer

N1 water pump

Setrab oil cooler

Custom Petrie racing catch can

Gizzmo boost controller

DRIVE LINE

Os giken Triple plate clutch

standard gearbox

BRAKES

R33 V-spec master cylinder

RDA rotors front and rear

QFM K750 pads front and rear

Accessories

Brake cylinder stopper

Braided brake lines front and rear

Greddy clear timming cover

HKS EBC III

Inovate A/F gauge

SUSPENSION:

HKS hyper max II coil overs

Greddy front strut brace

Hi cas lock bar

WHEELS & TYRES:

16inch R32 GTR wheels with RE55's 16/50/235 traveled roughly 5000kms

INTERIOR:

standard

STEREO:

Chameleon head unit

plates may be included not sure yet, car currently has R32 wheels on it as photos were taken before semi slicks were put on.

Any questions dont hesitate to ask

Price: $32,500ono

As posted i am currently only looking at EOI and car does NOT include RWC.

post-1964-1264218840_thumb.jpg

post-1964-1264218892_thumb.jpg

post-1964-1264218933_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...