Jump to content
SAU Community

Recommended Posts

Might wanna go a bit smaller if you're gonna stretch like drift style...

9.5" rim = 235mm, so youd need a tyre narrow-er than 235mm. a 255mm tyre on a 9.5" is actually a good fit, but wont look stretched at all.

likewise for the front, 8.5" = 208mm, so something smaller than 208mm

i'd suggest either going smaller wheels, maybe 7.5" on the front, and 8.5" on the back.

as for tyres, if you want bulk stretch, try 190s on the front and 205s on the back (using your size wheels).

good luck tho, sounds like a good plan, stretch would look mad with an s15!

Link to comment
https://www.sau.com.au/forums/topic/305327-which-tyre/#findComment-5052270
Share on other sites

doh! :(

:D

before i start...

i'd suggest either going smaller wheels, maybe 7.5" on the front, and 8.5" on the back.
245 Front and 265 Rear

FAIL...

turbo x-trail & 09yonnie GTFO

okay now that's over.

firstly ditch your 19" because no stretch will ever look good on a 19" rim. also think about your profiles, you wanna stretch a profile (30-35) that is so small it would look like your tires are naturally flat.

get yourself some proper jap rims 17 or 18. depending on your car go for width 9" + wide.

no smaller then 9" start with a 215 on the 9" like astro said. if you go bigger increase your tire by 1 size will give you a nice finished product.

Edited by 32_Dave
Link to comment
https://www.sau.com.au/forums/topic/305327-which-tyre/#findComment-5054183
Share on other sites

how bout something helpful rather than just trying to flame people.

put 1 / 2 together...

firstly ditch your 19" because no stretch will ever look good on a 19" rim. also think about your profiles, you wanna stretch a profile (30-35) that is so small it would look like your tires are naturally flat.

get yourself some proper jap rims 17 or 18. depending on your car go for width 9" + wide.

no smaller then 9" start with a 215 on the 9" like astro said. if you go bigger increase your tire by 1 size will give you a nice finished product.

Link to comment
https://www.sau.com.au/forums/topic/305327-which-tyre/#findComment-5054535
Share on other sites

firstly ditch your 19" because no stretch will ever look good on a 19" rim.

i dunno man, these rims are bigger than 19s and this 'stretch' looks good (IMO)

2401231-md.jpg

anyway, to OP...

i dont think stretch would look good on rays GTVs if they look anything like this

wheel-rays-gtv-ms-18-1.jpg

especially not 19s too.

as dave said, go something 17/18 and a tyre about 20-40mm smaller than the 9" (230mm), and have a profile of like 40-50% otherwise itll look to flat.

Link to comment
https://www.sau.com.au/forums/topic/305327-which-tyre/#findComment-5055056
Share on other sites

just trying to offer advice mate.

thats what this forum is about lol

how bout something helpful rather than just trying to flame people.

maybe you should keep your advice when you don't know what you're talking about

7.5" rims... you might aswell go to bob jane and get some of their specials on 19" chromies bro

i have 17 x 8's on the front like alot of people with 215/45's and there is a little bit of stretch, not he-man stretch though

Link to comment
https://www.sau.com.au/forums/topic/305327-which-tyre/#findComment-5061413
Share on other sites

maybe you should keep your advice when you don't know what you're talking about

Why would you say that?... You asked for advice, all he did was make a suggestion and you tell him that he doesn't know what he is talking about?

This isn't nissansilvia.com, try and treat people with a little more respect?...

The bottom line here is that there is little to no performance benefit in stretching narrow tyres on to wide rims...

If you want traction, go for the manufacturers recommendation for the width of wheel that you have (as they do a lot more testing on their own tyres than anyone else does)...

For example: 19 x 8.5" = 235/35R19 or 245/35R19 and 19 x 9.5" = 255/30R19 or 265/30R19 - these sizes would be just about perfect (depending on the brand of tyre).

If you want the stretched look then just down size from the sizes listed as manufacturers recommendation by 1 or 2 widths.

But be careful running over stretched tyres though, it puts a lot more stress on the sidewalls and can easily damage the tyre, cause the bead to be pulled off the rim, a blow out or delamination.

Also, it's a good idea to check with your insurance provider about what their policies are before fitting tyres, because if your tyres don't match their policies then you won't be covered if you have an accident.

BTW - Yes, I do work for a national tyre distributor and have done for quite a few years and I do know what I am talking about.

I hope this helps.

Link to comment
https://www.sau.com.au/forums/topic/305327-which-tyre/#findComment-5061530
Share on other sites

Why would you say that?... You asked for advice, all he did was make a suggestion and you tell him that he doesn't know what he is talking about?

This isn't nissansilvia.com, try and treat people with a little more respect?...

thankyou!

geeze i didnt know it was such a big deal lol

fck, shoot me, i made a bad call

couldve just been like "nah man 7.5 is too narrow for any performance car" but nah, had to be a keyboard warrior and flame me etc...

anyway enough of the winging...

xxx200, that EMS you sold me a few months ago is working a treat! got it installed and tuned bout 6 weeks ago!

thanks again!

Edited by turbo x-trail
Link to comment
https://www.sau.com.au/forums/topic/305327-which-tyre/#findComment-5061636
Share on other sites

hay buddy

i have 19x8 and 19x9 work vs-kf rims on my 34 and i run 225/35/19 and 235/30/19 respectively they have a lil stretch and look good

btw 19s r not very good for driving fast around corners

i run pirelli corsa tyres

Link to comment
https://www.sau.com.au/forums/topic/305327-which-tyre/#findComment-5062950
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...