Jump to content
SAU Community

Recommended Posts

hey guys

i was driving home one morning giving it a heap , i didnt notice the tempreture but when i looked down it was on H !

i was about 300m from home so i put it in 5th and cruzed very slowly. i opened the bonnet and it was pissing out steam and coolant was dripping out from the back of the motor but wasnt exactly sure where.

later on i got in there and had a look . i narrowed it down and i think i found where it is but cant get rite in there . it just under the last manifold at the back of the motor about 200mm down. ive tried to look underneath but the starter motor is in the way and i cant get the last bolt off ! and i dont want to start taking off the manifolds coz i no its a big job!!

i no that this isnt much explanation but hopefully one of use have had the same problem and use could help ????

even if use could recomend me a place to go in perth that is a specialist in the whole cooling side of the motors.

if use can help at all, it would be much appreciated!!!!!!!!!!!!!!!!

Link to comment
https://www.sau.com.au/forums/topic/306580-big-problem/
Share on other sites

Nice work champ :)

Try harder to get that last bolt of for the starter motor...you got one off and gave up...you were halfway there.

Manifolds aren't a massive job either, 12 bolts and some vacuum and water pipes.

Pic of side of the block...probably just busted a hose, or it's come loose:

http://img.photobucket.com/albums/v20/IIIRII/DSC00665.jpg

Link to comment
https://www.sau.com.au/forums/topic/306580-big-problem/#findComment-5067788
Share on other sites

yeah ill give it another shot tommorrow but its a really hard place to get to. its kind of im possible to get enough leverage and force to get it off lol!!

is it possible i have cracked a manifold or anything like that ?????

Link to comment
https://www.sau.com.au/forums/topic/306580-big-problem/#findComment-5067822
Share on other sites

It will be either the heater hose that runs behind the engine or the rubber hose that comes off a small metal pipe that sits under the back of the intake manifold (possibly turbo water feed, can't remember).

I had the heater hose back there let go on the dyno :cool: pricks of things to change! and they're a molded hose if you really want to get picky.

Edited by bubba
Link to comment
https://www.sau.com.au/forums/topic/306580-big-problem/#findComment-5068381
Share on other sites

done ! i tryed for 2 nights trying to get that starter motor bolt off ! lucky my mate could do it !

it was just a small pipe under the manifold . was a prick to get into but i just made it happen ! (some how) hah

just another question . . . i couldnt of done a head gasket or something could i ??

Link to comment
https://www.sau.com.au/forums/topic/306580-big-problem/#findComment-5072084
Share on other sites

If you're concerned about headgasket, check for oil/water out the exhaust, check radiator for oil mixing in with the water and check the sump for water mixing in with the oil.

Maybe a compression/leakdown test if you're really worried?

I've had my RB30DET pretty hot.. blew a heater hose on the road one time and also boxing day burnouts last year water temp hit 105deg (this was well off the top of the stock gauge), 110deg - get worried, 120deg - boiling coolant.. this is probably where you will start to warp the head.

Link to comment
https://www.sau.com.au/forums/topic/306580-big-problem/#findComment-5072489
Share on other sites

Glad to see you have got it fixed. Well done.

Now, call me a miserable old git, but I cannot help myself ... ... ... ...

i no that this isnt much explanation but hopefully one of use have had the same problem and use could help ????

I can ignore the "no" rather than "know", as an example of Twitter-youth mangling of our language. But the misuse of "use" , instead of "you" - for God's sake!!! It is the same number of letters, so it is no easier to type!! Just use the right word, why don't you???

Please, to save my blood pressure and be kind to the older generation, use "you" and not "use", because misuse of "use" is not useful!

Cheers. :D

Link to comment
https://www.sau.com.au/forums/topic/306580-big-problem/#findComment-5073205
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh ok that makes so much sense. Thanks for clearing it up!
    • And these modern "environmentally friendly" EV vehicles also run on the same smoke! When the engine, wiring, or batteries let it escape it also stops running!
    • Yeah - I found the same information too.. 30% open is like 85% of flow etc. So it's probably going to be minor if not completely imperceptible. I also have a larger pod filter here, will swap that on and see if there's any difference. The hardest part is finding a place to uh, test this. It's quite noticable just how much having ducting to the otherwise completely open pod cools the intake temps down. It's better boxed, or shielded but driving for 30 seconds really makes it plummet to near ambient temperatures. I recall in the past when I was a RB land and had a nice flowing airbox -  - Then I took the lid off and put a pod there, and gained 9 psi of boost and about 60kw from the restriction I didn't know I had - with the controller at same duty cycle. However finding people using over the radiator intakes having similar KPA drops at WOT on built setups makes me think there restriction could be the exhaust or potentially the headers. Either way though, there's no real estate to play with and nothing that can realistically be done about it. The original dyno plot without the airbox, and the larger pod had a better curve. It was later I added the ducting and airbox, and a smaller pod to make it fit in there...
    • That's not completely truthful now is it? Any flex fuelled factory cars also had the option to run on steam.
    • Yeah so I guess your mechanic would know turnaround better than me....but I would have thought you had access to same day or overnight rack rebuilds there....any big city here in Australia has that service.   There are a couple of o-rings and seals involved, I guess the risk is the part is specific not general. Other option is if you can have it on stands in your garage for a while, steering rack removal is pretty simple (2 mounting brackets, 2 ball joints (separate by undoing the nut to the top of the threads, put a pry bar between the steering arm and control arm to put pressure on it then medium force on the side of the ball joint or top of the nut with a hammer to break it free) and then the trickiest bit is the splines to the steering rack (not too bad to undo, one nut then it slides out, but mark it first so you can reassemble it straight)
×
×
  • Create New...