Jump to content
SAU Community

Recommended Posts

Hi guys....

I was visiting Adelaide from Victoria a few days ago on the 26-28 December....

A very nice trip indeed, we took the long way along the coast and stop

in a few towns, also went to Kangaroo Island...

Saw a couple of Skylines in Hahndorf on 26th December, a parked grey/gunmetal R32 and a passing R33 with windows down...

Also the evening of 28th saw a silver R33 parked at the Chinatown...

If that's anyone from this forum, just saying hi... none of you will recognise me anyway, cause I didn't bring my Skyline, just driving my friend's Corolla...

Link to comment
https://www.sau.com.au/forums/topic/30728-adelaide-visit/
Share on other sites

Funny I only spotted 3 so far during those 4 days visit....

Didn't even seen any in Glenelg Beach on Friday night either when we went to Hog's Breath Cafe.

The thing I see (actually heard) more from our hotel room are revheads in commodores spinning tyres and revving through corners around King William St... very annoying when we tried to get some sleep at night, even worse and more numbers than Melbourne's Chapel St hoons doing laps... got one even doing burnouts for like 1 min or something... saw smoke everywhere from our window.

Link to comment
https://www.sau.com.au/forums/topic/30728-adelaide-visit/#findComment-622501
Share on other sites

Funny I only spotted 3 so far during those 4 days visit....

Didn't even seen any in Glenelg Beach on Friday night either when we went to Hog's Breath Cafe.

The thing I see (actually heard) more from our hotel room are revheads in commodores spinning tyres and revving through corners around King William St... very annoying when we tried to get some sleep at night, even worse and more numbers than Melbourne's Chapel St hoons doing laps... got one even doing burnouts for like 1 min or something... saw smoke everywhere from our window.

Thats becuase the police don't do anything about commodores. There is about 30 std. height commodores in Adelaide, and the rest sit on their arse, do burnouts, basically a law unto themselves. U didn't see any skylines cos half are in their owners back shed getting modded to pass regency, and the other half here cruize like were all ***n on the run so we dont get caught for a non std gearknob.

Link to comment
https://www.sau.com.au/forums/topic/30728-adelaide-visit/#findComment-622700
Share on other sites

Then what about that humongous Holden building I went past everytime I drive to Geelong... I'm sure it says something about Holden Plant there...

No one is getting OWNED, Timmayy... Cos if I really know sooo much about Holden, I must have been a Commie lover and I would have not bought and would not be driving a Skyline right now! :(

Link to comment
https://www.sau.com.au/forums/topic/30728-adelaide-visit/#findComment-622885
Share on other sites

Well put it this way mate....

I grew up 25 years in a place where Toyota, Toyota, and Toyota are the cars I saw on the road. Other majority cars are Honda, Isuzu, Suzuki, Daihatsu, Mazda and some Mitsubishi, hardly any Nissan. The rest were europeans like BMWs and Mercs which is out of reach by 90% of population, including me. Even Holden Gemini has long gone since I was 5 yrs old, and until 5 years ago when I arrived here on Australian shore, I didn't even know that Holden is still around.

As far as I remember from my childhood, we don't have Ford back there either. I've only known Ford from books about Henry Ford's Model T. I may not know for sure if Holden is in Geelong or Adelaide, but I do know Toyota is in Avalon.

The one in Geelong must have been just a dealership, but strangely the building looks like factory, maybe it's HSV or maybe they just make the bolts to be sent away to Adelaide's Holden factory.... Maybe my short memory and lack of attention fools my brain into mistakenly assume that Ford building is a Holden building...

My 2c

Link to comment
https://www.sau.com.au/forums/topic/30728-adelaide-visit/#findComment-623008
Share on other sites

rs73 havent you heard of the Elizabeth factory? Holden originated in Adelaide, although parts are made in victoria like the v6 engine i think hsv is in vic aswell

Well finally there's some "light" here... yeah, it could be either the holden or hsv engine plant that I saw in Geelong. It's on the main highway on the left from Melbourne, can't missed it.

Elizabeth factory don't know abt it... although Elizabeth suburb does ring a bell as I think we went past there on way to Cape Jervis or Barossa Valley (can't remember now which way....)

Link to comment
https://www.sau.com.au/forums/topic/30728-adelaide-visit/#findComment-623031
Share on other sites

Like I said... that's why we're driving our skylines now...

Anyhow, Trip to Adelaide was great.. look forward to do it again next year as there's still more to see that we couldn't cover in such a short time.

Happy New Year everyone, drive safe on the holiday and have a good one!

Link to comment
https://www.sau.com.au/forums/topic/30728-adelaide-visit/#findComment-623408
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
×
×
  • Create New...