Jump to content
SAU Community

Recommended Posts

Hi Everyone,

Just arrived back for 2 months (holidays between uni semesters over there).

Filled my hand luggage and suitcase full of goodies. I dont need any more fans, kimonos or wasabi, so car parts it is!...

Also a few items left over from my own past cars/projects that were still at home. EVERYTHING can be picked up and im happy to help install if you are in the area. KYOGLE (northern NSW near Lismore)

For any car:

Z32 AFM $180 posted. From my old 97 model Zed.

Single DINN slot drawer with fake wood grain front $20

Single DINN triple gauges from R32 and R33 GTRs can be wired in to other cars. $20 to $150

OMORI water temp gauge, 45mm with sensor, mounting etc. $75

R32 GTR:

Triple gauge clusters (crappy $20, perfect $100) have a bunch

CUSCO adjustable castor rods $200 (these will NOT fit 2 wheel drive skylines) GTR and GTS-4 only.

Front indicators $180 a pair, have a 2 spare drivers side ones($80ea) and 2 pairs.

RAZO shift knob $20

R32 GTS-t

Front indicators - 3 clear ones $75 ea

Front indicators - 7 orange ones $60 ea

Z32 AFM with HKS filter, TRUST pipe and wires removed from RB20DET R32. $300

R33

NISMO clear side indicators $75

GTR Triple gauge clusters (carbon face surround type) $100ea and $140 for the red LED one.

Indicators that may be from a different car? (clear) $75 the pair, they were on an aftermarket front bar.

R34

GTT triple guage clusters with wire loom connector. one with cover and would suit project/custom install on another car. $90 and $150 respectively.

S13 stuff:

Aftermarket tail lights $200

Type X tail lights $350

CUSCO adjustable castor rods $200

HKS BOV with pipe to fit SR20 $150

S14 stuff:

S1 front indicators $35 ea

CUSCO adjustable castor rods with air deflector $200

Instrument cluster (white face gauges) $100

M's AFR $25 (air flow resetter?)

Front grill (bit between the headlights) $50

TRUST air filter to fit stock airbox $30

Orange indicator (L) $35

I can email high rez photos of any item (bit much to post it all here ><).

Most the bits unpacked

post-21158-1265589583_thumb.jpg

post-21158-1265589930_thumb.jpgpost-21158-1265589911_thumb.jpg

post-21158-1265589893_thumb.jpg

the car these came from:

post-21158-1265589944_thumb.jpg

post-21158-1265589866_thumb.jpg

the drawer

OMORI gauge

post-21158-1265590152_thumb.jpg

R33 gauges

post-21158-1265590632_thumb.jpg

post-21158-1265590904_thumb.jpg

post-21158-1265591878_thumb.jpg

R32 $60 for this one (bit faded)

post-21158-1265592071_thumb.jpg

My home Phone number is: (02)66333131

Email [email protected]

or PM/post here is fine i will check daily.

thanks for looking,

martin

Edited by mmarschall

Bump, S13 type x set sold and posted. Still have a couple more lights and a scratched center (would need a respray).

Our house is now on the market so the more things i can sell the less i have to pack into moving boxes... make an offer! :P

thanks for looking,

martin

Hi Pete, all parts are used.

and 180sx tail light pics:

Both lights come with bulbs and wire/connectors but only one fitted on the pic.

post-21158-1265887757_thumb.jpg

good condition, ill try and clean/polish it over the weekend if i have time. no cracks! Black center garnish has some scratches.

post-21158-1265887776_thumb.jpg

post-21158-1265887794_thumb.jpg

Where i put the blue arrows is a crack in the surface on one lens.

post-21158-1265887822_thumb.jpg

One type X set and the carbon type ones i brought back on my last trip, im sure i have another different aftermarket set somewhere in the packing boxes... (we were planning to sell the house before i went to japan 5 months ago so i already packed half of this car stuff away ><), everything's finally going ahead now....!

S14 stuff:

CUSCO adjustable castor rods with air deflector $200

hey mate can you please send me part nummber, item description (bushes, thread etc) and also pics to [email protected] please cheers

with the r32 gtr cluster gauges i want to buy really cheap ones like really cheap i dont care if they dont work i just want it to look clean i want to put it in my r32 gts ive got these graphic equalizer at the bottom which i dont use and i dont how much their worth their clarion ones would anyone know how much their worth ?. i would like to have triple cluster gauges their to give the inside a nice look

Panel filter:

post-21158-1266305463_thumb.jpg post-21158-1266305477_thumb.jpg

CUSCO S14 rods, printed on them is: CUSCO 232 473 A

Thread, bolts and rubber all perfect.

post-21158-1266305518_thumb.jpgpost-21158-1266305566_thumb.jpg

R32 dinn triple gauges, cheap ones all sold, only near perfect units left (I will try find some more cheapies when im back in Japan). :P

post-21158-1266305973_thumb.jpg

Thanks for looking,

martin

  • 2 weeks later...

1 pair of GTS-t R32 indicators left (orange ones) $115 posted.

S13 rods and the cheap/damaged R32 gauges sold (good sets left)

other bits still here open to offers. :D

  • 3 weeks later...

Z32 AFM + HKS pod filter + connector/plug with wires, price drop $225 posted

GTR32 drivers side indicators $85 posted. (perfect condition with bulb and connector plug)

Open to offers on whats left and very negotiable for pickup. Im here for another 2 weeks (then back to teaching in Japan).

  • 4 weeks later...
  • 2 weeks later...

gday martin have you still got z32 afm from your old z car and is the mesh in good nick looking for for my rb20 would you take 150 posted if so msg me your details my no 0403195893 cheers steve

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...