Jump to content
SAU Community

Recommended Posts

  • 5 years later...
  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

I use to own the white skyline with gold wheels and carbon bonnent that is now in launny. I'd like the see the dyno sheet for it. It made 242kw at wheels with only 12psi so it could make close to 300 with more boost. The car doesn't get the power to the ground though.

Was bored tonight after a few drinks and did some searching for my car and its previous owners.

Its funny how way back then 300kw was a big deal. lol

For everyone that new this car and the old 25 way back then.. When it finally did die after lots of abuse we pulled the engine down to check it out.

With the setup I bought it with and running haltech E11v2 it made 300rwkw @ 17psi. It stayed like that for a while then the same engine with twin T3/T4 turbos and 1000cc injectors made 399rwkw and was very very laggy. lol

Anyway, the engine stripped down we found it had Tomei pistons, Tomei 256 inlet and 264 Exhaust cams, Tomei springs, metal headgasket and everything else was stock.

So the poor old 25 put up a good fight before it burnt no.6 piston and lost compression. It still drove with a slight gurgle at idle and still smoked the tyres in 3rd gear.

Its had a few big changes since back then, Now has a built 26/30, Garrett T51r, soon to have 1600cc injectors, 175hp nos kit and C4 auto. Will be tuned in a few weeks once I get it all sorted and back together again

Ha ha ha ha...

I remember going for a lash in it with Andrew (the origional owner) the day it rolled off the boat. It pushed 240 odd rwkw later that week. It was fast back then.... especially compared to my r31 gts-x coupe!!!

Ahh.. the good old days.

We allways wondered what was under that head....

Was bored tonight after a few drinks and did some searching for my car and its previous owners.

Its funny how way back then 300kw was a big deal. lol

For everyone that new this car and the old 25 way back then.. When it finally did die after lots of abuse we pulled the engine down to check it out.

With the setup I bought it with and running haltech E11v2 it made 300rwkw @ 17psi. It stayed like that for a while then the same engine with twin T3/T4 turbos and 1000cc injectors made 399rwkw and was very very laggy. lol

Anyway, the engine stripped down we found it had Tomei pistons, Tomei 256 inlet and 264 Exhaust cams, Tomei springs, metal headgasket and everything else was stock.

So the poor old 25 put up a good fight before it burnt no.6 piston and lost compression. It still drove with a slight gurgle at idle and still smoked the tyres in 3rd gear.

Its had a few big changes since back then, Now has a built 26/30, Garrett T51r, soon to have 1600cc injectors, 175hp nos kit and C4 auto. Will be tuned in a few weeks once I get it all sorted and back together again

Was bored tonight after a few drinks and did some searching for my car and its previous owners.

Its funny how way back then 300kw was a big deal. lol

For everyone that new this car and the old 25 way back then.. When it finally did die after lots of abuse we pulled the engine down to check it out.

With the setup I bought it with and running haltech E11v2 it made 300rwkw @ 17psi. It stayed like that for a while then the same engine with twin T3/T4 turbos and 1000cc injectors made 399rwkw and was very very laggy. lol

Anyway, the engine stripped down we found it had Tomei pistons, Tomei 256 inlet and 264 Exhaust cams, Tomei springs, metal headgasket and everything else was stock.

So the poor old 25 put up a good fight before it burnt no.6 piston and lost compression. It still drove with a slight gurgle at idle and still smoked the tyres in 3rd gear.

Its had a few big changes since back then, Now has a built 26/30, Garrett T51r, soon to have 1600cc injectors, 175hp nos kit and C4 auto. Will be tuned in a few weeks once I get it all sorted and back together again

Yeah funny how times change, I was with Matt when he first took you and you girl friend for a ride in it from the silver dome I remember the look on your face, you loved it as did every one that went for a ride in it at the time, what stood out was the sound of it, the screamer pipe was like nothing else any one had ever heard before and it was dyno’d in Melbourne at Race Pace- Ice with old owner Andrew or the importer did? and now is Matts Mechanic for his GTR and only found out as he was telling him about his old cars lol small world

Edited by RAZOR32

Sure is a small world. So hows things going with Matts GTR...?

Im just waiting to get parts back now and get the old girl up and running again.

Cant wait to drive it again with a angry tune and a big shot of nos...

I guess I will be testing that out at powercruise or the drags when it opens again... :down:

yeah he still got the GTR, its nearly been 2 years since it was last running lol got a full cage put in it about a year ago, and only just took it to Kuzzie’s a couple of weeks ago to have it put back together just chasing up a couple little parts, it's got a whole new motor and turbo’s and new suspension and 8 pot APracing brakes. Matts hoping to take it to Melbourne in a few weeks to Race Pace to have it tuned and other new bits put on. He still keen to take it up the drags and stuff but it’s now built for tarmac rally's and has entered in Targa Wrest Point and the Rookie Targa next year, I’m going to be navigating for Matt its gunna be awesome fun.

I can’t wait to see your old best at the drags again and in the burn out comp, it will be great to see a import with big power at the drags!

Edited by RAZOR32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...