Jump to content
SAU Community

Recommended Posts

Today i got the call from the head shop and my head is warped to no avail. So the car is up for sale, as is because i cant be bothered.

Everything on the car is stock, and the car is 100% STRAIGHT! interior is VERY CLEAN & UN-MOLESTERED - i've owned the car for 6 years, before that its owner was my brother-in-law, who imported it in 1999/2000. with 30k on the clock.

The car has:

- 4x 6k old Nitrogen filled Maxxis mid-range sport tires.

- Brand new 52mm ALUMINIUM radiator. (more on this later)

- New Timing belt (not installed).

- New head gasket (not installed).

- Nice muffler from japan (not a cannon) - installed)

- Clean interior

- Straight body

- NO CRASHES

- All 4 corners have STOCK suspension which is firm & makes no noises!

- Gearbox is perfect, no syncro wear.

Car had a recent ROADWORTHY because i was thinking of selling before the overheating, car passed perfectly except for FRONT CONTROL ARM BUSHES - which i got changed then and there!

So when a new engine is in (or new head) - (BLOCK IS PERFECT) - then car will easily pass a roadworthy. (ofcourse the new engine will need certification from your mechanic/engineer - but they can do this as part of your RWC.)

Aircon is PERFECT! recently rehauled before summer, ran GREAT as i had it re-conditioned, but had to bleed because i took the engine apart.

STORY;

I was driving home from autobarn and the car overheated, so i pulled over and found the stock radiator top pipe had cracked (plastic) so i reattached pipe, filled with coolant and off i went, everything was fine...

On another local trip, almost home car started overheating again and the radiator top completely broke and i had the car towed home. From there i thought maybe the thermostat wasnt working, sticking, thats why it intermittently overheated, so i removed it and grabbed a new radiator (Aluminum one) & installed this, bled coolant into the system, then went for a drive... the needle only just came off COLD and stayed there no matter what - so water pump was good, radiator was good, but soo large and without a thermostat, ran too cold.

But from there excess pressure built up in the coolant system, and my mechanic and i came to the conclusion the head gasket is gone or the head is cracked/warped - the overheating was due to a sticking thermostat.

So i got down to business, low & behold, the head is warped due to overheating, and causing exhaust gas to enter the coolant system...

So.. after that novel, i require a new head & thermostat and the car is like new again... but after all this i really cant be bothered...

OUTCOME;

I want to sell it AS IS - that is NO RWC and NO REGO.

You come and pick-it up on a trailer and its gone.

I will happily put the engine back together so its easier to transport.

Car will come without a radio.

Car will come WITH the new head gasket, timing belt & new aluminum radiator.

PRICE;

I want $5500 and take it away, a good NA engine is $500 on here, plus the work of changing just the short motor, isnt much for the mechanically minded and a few friends OR just get your trusted mechanic to do it.

Remember the car is STRAIGHT, NO CRASHES, INTERIOR IS VERY TIDY, AND WAS IS IN ROADWORTHY CONDITION (as of 2 weeks ago) BAR THE ENGINE... you are not buying a thrashed lemon, the car was well taken care of and serviced. With a new engine, this car will outlive most NA R33s.

Matt - 0419116318 - Dont hesitate to call.

post-15800-1265677329_thumb.jpg

post-15800-1265677499_thumb.jpg

@MYSTRM

- Hey there, thanks for the offer, but i dont have that much to put on top to get your car.

@green1via

- Sounds pretty good, can you give me more info on the Cefiro? condition, k's, working order?... also do you mean you'll chuck cash my way or you want cash your way?

@MYSTRM

- Hey there, thanks for the offer, but i dont have that much to put on top to get your car.

@green1via

- Sounds pretty good, can you give me more info on the Cefiro? condition, k's, working order?... also do you mean you'll chuck cash my way or you want cash your way?

No worries, good luck with sale

cheers

Thanks MYSTRM, good luck with finding a nice NA.

@curlyjimbo

- The cost to fix overheating is a new thermostat and a new head.. thats it. everything else i have and will come with the car.

im pretty sure on here you can find a NA head for $150-$400 bucks? so my loss is your gain.

Matty

Thanks MYSTRM, good luck with finding a nice NA.

@curlyjimbo

- The cost to fix overheating is a new thermostat and a new head.. thats it. everything else i have and will come with the car.

im pretty sure on here you can find a NA head for $150-$400 bucks? so my loss is your gain.

Matty

Is there something I'm missing?

+ Would it be hard to get a RWC on it since it's not running yet?

Is there something I'm missing?

+ Would it be hard to get a RWC on it since it's not running yet?

In what sense? i just dont have the time to fix it, it'll be worth more to fix and sell, but i dont have the time.

And getting a roadworthy now would be impossible, because it wont start.. you'd have to get a new head OR new engine, then it'll get a RWC really easy.

So if I were to pay for the parts/work needed to be done to get the car in good working order so it could be registered, would you know roughly how much money we're looking at realistically?

and some more pics would be great!

Thanks.

So if I were to pay for the parts/work needed to be done to get the car in good working order so it could be registered, would you know roughly how much money we're looking at realistically?

and some more pics would be great!

Thanks.

What pics are you interested in? i can take some and post.

And if going the new head route... getting the new head (150-400), having it shaved ($100), new head bolts ($?) then all you gotta do is the new head gasket (supplied), torque head down, reattach exhaust and intake, new timing belt, harmonic balancer, intake piping, replace thermostat, fit radiator, then fill rad, and the car is ready to get its roadworthy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...