Jump to content
SAU Community

Recommended Posts

Hi

im looking at selling my r34 and buying a clean a4 quattro

was just after some tips from any people here that own/have owned one etc (i know its a long shot) on what to look for when inspecting one as im new to european cars. also if anyones had any bad/good experiences with them etc anything really

specifically i'm looking at the A4 Quattro "s" line which aparently has the same bodykit as the S4/RS4 or something :down:

thanks in advance :P

Link to comment
https://www.sau.com.au/forums/topic/307598-any-audi-a4-quattro-owners/
Share on other sites

Apologies in advance for this, but...

I was looking into B5 S4 avants or B6 A4 avants about a year ago and ended up buying an M35 stagea. Bigger, cheaper, faster and easier to find a good one.

I owned an E36 BMW a few years ago too, and servicing wasn't bad. Replaced the radiator, water pump etc and didn't cost too much. As with anything, just do your research and wait for a good one to come along.

try www.ozaudi.com - that's where i found a couple i was interested in, but in the end the stagea was a much better option. :)

Having owned and driven a few Audi's.

In comparison to your R34 the Audi A4 quattro is;

* A super boring car. (Thats ok if you just want something to get around in, without any thrill).

* Far slower in every environment except ice, snow or heavy rain.

* Expensive to maintain.

* Very expensive to modify.

* Build quality is on par with nissan (ok but, not jaw dropping) but, thier selection of interior materials is very poor in terms of UV resistance and wear.

* The fuel ecconomy is better, slightly.

* Is more comfortable to drive

* Is safer in a crash

Thats all I can think of at the moment.

i did all the factory training when i was an apprentice for Audi (among othe marques like nissan and honda) and found them to be very well built, reliable but expensive to modify and repair. i remmeber an a6 needing new cats and they were 2700 each :)

I have a B6 Quattro, have owned it for 3 years and moddifed it quite alot.

Full Revo stage 3+ turbo kit:

GT2871r Turbo

ATP Manifold

Electronic Boost Controller

Front Mount intercooler

3 inch stainless turbo back exhaust into Milltek twin system

New sachs clutch

New ECS tunning brakes (larger two piece discs) front and rear

ATP intake pipe

Forge Divertor Valve

BMC Air Intake

There is no S4 body kit, the S line is similar but not the same or there are (like mine) factory audi body kits which are called vortex kits.

They are not expensive to run or maintain at all, infact my GTR is mre expensive to maintain. My wife is currently driving the car and she averages 40-50,000km per year and it is a brilliant car.

i think there are major services to be done at 4years or 90,000km but if you go to an independant guy like Audvolks in Calyton Vic they are cheap and experts on maintaining these cars and brilliant to deal with.

The only thing to remember when modding them is that they will make decent power but it is not as easy to get as a skyline, and are limited as to the amount of power they will produce.

It is a pleasure to drive, safe, practical and cops don't even look twice. With the turbo kit it would eat a V8 S4 and uses less fuel. If I sold mine i would upgrade to an S4 and superchage it, the B6/7 is just a great car!

Ask away if you have any questions.

There are a number of options to modify a B6, try the following websites:

atpturbo

034motorsport

eurocode

ecstuning

Forums:

Audizine

Qzaudi

There are plenty of parts for these cars and extensively modded in the US.

Mine is making between 200-210 awkw depending on boost and is a ready nice car to drive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...