Jump to content
SAU Community

Recommended Posts

I'm after a 3rd brake light for my 33 having dispensed with the standard spoiler.

I'm having trouble sourcing something suitable. I mean you can pick up a Chinese 'special' LED arrangement on Ebay, but I believe the law says the 3rd brake light needs to be 'shrouded'?

I can't low low mount 'cos of the wiper, so it needs to be high mount.

I am probably gonna trawl some wreckers to see what I can find, I doubt it will be easy to find something suitable due to cars having different rear wind shield angles etc.

Any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/
Share on other sites

I thought, if the car didn't come out with 1 you didn't have to have 1. But in saying that, the wife got pulled over the other day, as the rear spoiler light wasn't working, and she told the coppa that we are removing the wing in a week or two as it's getting a full respary, and we aren't putting it back on. Well, he recons by law we have to have an eye level stop light mounted on the window????????? I've looked and haven't found to many that are going to fit the curves nice at all, so I'll see how we go. My spoiler has been off now for a couple of years and never once been pulled over for it. So who knows mate, but there must be a law somewhere bout it.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087054
Share on other sites

i dont know if it would be the same, but i know not to long ago chris rogers had to find a 3rd stop light for a 32.

he ended up using one from either a camry or magna (cant remember which)

pm him and see what he used

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087061
Share on other sites

In some states a high mount brake light is an ADR requirement on any car after 1985 , cars that were in factory production first started using them , as standard therefore the ADR. I just recently had to fit one to my GTR R32 , i went to supercrap auto , and got them to order one out of a bosch catalogue book , cost 60 bucks for a 24 led adjustable high mount light and fitted it to rear window . sorted

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087065
Share on other sites

Yeah I'll go down to supercheap and ask.

I know the law says you need one, also in the event of being rear ended I would worry that the absence of one could be used against me.

Just from a practical POV they are good also. If you go out on a cruise and end up behind a load of de-spoilered Skylines (w/ no 3rd brake lights) it is annoying not being able to see when the cars way ahead on the road are braking. You have to me more 'reactive' - only being able to see the car directly in front - and so you get more of a 'concertina' effect going on, so more risk of crashes.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087301
Share on other sites

not long ago when i was trying to get a RWC here in melbourne, my mechanic picked up a simple stick on one like those you get from any auto store, as i also removed the spoiler and because of the angle it doesn't look perfect during the day, but at night it lights up really nice and you can't tell it's not perfectly straight and he gave me the nod and said its fine so yeah, im happy

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087526
Share on other sites

  • 1 year later...

for those that asked via PM.

3rd light is from a mitsi magna from 2002 on. they are LED ones and when you do it get the harness/mounts as well. sits neatly on the top of the glass.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5952796
Share on other sites

I went to supercheap and picked up a LED brake light for 30 bucks, Just a 7 inch or so long bar self contained with 12 LED's in it or something. Install was easy, comes with 3M tape already on the light casing, pretty much a basic wire in job.

Works a dream, bright and legal.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5953019
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...