Jump to content
SAU Community

Recommended Posts

Page 18 of Brembo's Gran Turismo High performance brake systems catalog which you can find here ... http://www.brembo.com/NR/rdonlyres/12D6A5F...talog_R2DEF.pdf ... reads ...

Caliper to wheel clearance is part of the reason why a number of R35's run 19 inch track wheels instead of 18 inch track wheels.

There is a new article on our website here which explores the 19 inch track wheels options for R35's, and discusses caliper clearance, tyre choice, lateral stiffness of wheels, cooling considerations etc in detail ...

http://www.tunersgroup.com/r35_wheels.html

- The Tuners Group

i agree greater clearance is better, 3mm might be recommended (sounds like a magic number someone plucked out of their clacker to be frank) but anyway running 18" rims with less clearance than that - whilst not ideal - does actually work fine, speaking from experience and watching several others.

Page 18 of Brembo's Gran Turismo High performance brake systems catalog which you can find here ... http://www.brembo.com/NR/rdonlyres/12D6A5F...talog_R2DEF.pdf ... reads ...
"Brembo recommends a minimum clearance of 3mm between the caliper and the wheel spoke or rim."

Brembo are one of the most experienced specialist motorsport brake manufacturers on the planet, so if they recommend a particular minimum clearance, that minimum clearance will have been specifically chosen by Brembo for engineering reasons.

http://en.wikipedia.org/wiki/Brembo reads ...

"Brembo brakes are standard equipment on supercar marques such as Aston Martin, Audi, Ferrari, Lamborghini, Maserati, Mercedes-Benz, Pagani and Porsche cars, and on some high-end American sportcars such as the Ford GT, Chevrolet Corvette, Cadillac CTS-V, and the Dodge Viper, and even factory performance coupes such as the Chevrolet Cobalt SS Turbo and the Hyundai Genesis Coupe Track Edition. Other marques that have Brembo brakes (either standard or as an option) include Acura, Alfa Romeo, Buick, BMW, Chrysler, Fiat, Hyundai , Jaguar, Land Rover, Lexus, Mitsubishi, Nissan, Peugeot, Infiniti, Pontiac, Renault, SEAT, Subaru, Volkswagen and Volvo.

The following motorcycle manufacturers use Brembo brake systems: Aprilia, Bimota, BMW, Ducati, Harley-Davidson, Husqvarna, IMZ-Ural, KTM, Moto Guzzi, MV Agusta and Voxan ...

Brembo brakes are also used by a variety of Formula One teams including Ferrari, and the majority of MotoGP teams use Brembo brakes."

Brembo was established in 1961, so when Brembo make statements on minimum clearances, they are speaking as a specialist brake manufacturer that has been operating for 49 years and they are speaking from experience at the very highest levels of motorsport.

Edited by TheTunersGroup
Do however really like the look of the Volk TE37 G2 wheel in diamond black. Not sure what sizes they come in though.

Martin from Willalls tells me the standard 18' TE 37's only have 1mm clearance from calipers !

It the same with the replica rotas too, there's bugger all in it. It's not ideal, but it will work. 3mm is a magic number which cannot apply to all wheels, rotors, how it's vented (have you seen how the brembo rotors are vented? - get some ap's - they are better), pads used, tyres, which track, how you drive, etc etc etc. All we can tell you is it works - in the real world on our cars - because we have done it.

You can increase the clearance somewhat by using spacers (for another mm or two) however i am sure there are experts that will tell you spacers are evil, so i will not bother. If you want to run 18's with the maximum clearance you can get (a lot more than the te's) there is another option. It's relatively cheap, but they are a quality jap rim. R35 owners can send me a PM and i will share the info.

There is a thread about Enkei 18" GTC-01 wheels on NAGTROC which was started back in March 2009 ...

http://www.nagtroc.org/forums/index.php?showtopic=29400

We are currently checking with Enkei to get exact data from Enkei on how much caliper clearance the Enkei 18" GTC-01 wheels have if used on an R35.

Do however really like the look of the Volk TE37 G2 wheel in diamond black. Not sure what sizes they come in though.

Hi Jeremy,

The Volk Racing VR.G2 wheels are made in 16's, 17's, 18's, 19's and 20's in a range of widths and offsets.

See the photos of this Australian R35 ...

http://www.tunersgroup.com/Cars/gtr1.html

There is a closeup photo showing the wheels on that car in it's photo gallery.

Edited by TheTunersGroup

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...