Jump to content
SAU Community

Recommended Posts

So as above...my 32 GTRs Clutch Fan is always on...not only does it sound sh1t but it feels like the car has an engine brake on all the time...it must be robbing it of power big time!

So, im interested to know what people have done to overcome this...a new clutch fan is $400 give or take...are any of the other RB series engine fans interchangable???

I was thinkin of going AU thermos, has anyone fitted these to a 32 GTR??? Results?

Throw me some options people.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/308361-r32-gtr-clutch-fan/
Share on other sites

Sounds like your factory one has seized, so just replace it.

You'll never get the same cooling as a clutch fan, thermo's IMO are pointless for a street car.

If you can't justify $400 on proper and effective cooling for your GTR... you should probably sell it. A $400 part is the least of your worries

Not an issue of justifying proper effective cooling, these are not $100k cars anymore...$400 is $400...if I can get an identical result for $300 then im going with that option, make sense?

As with most things NISSAN being interchangable, I am curious to know whether something like an RB30 fan is similar, if so, its probably cheaper new as it doesnt carry the GTR 'lets jack up the price' stigma....

most of the nissan ones are interchangeable. the height vary;s tho. RB30 ones are much shorter then say an RB20 one, so best bet is to take yours out and go match it up with a new one.

FWIW i run a RB30 R31 clutch hub with rb25 fan on my neo motor and bought the hub new for 80 bucks from motor traders

Thermo fans without shrouding to match your radiator will almost certainly perform less well than a mechanical driven fan.

The thermo-clutch fan is pretty basic in operation. Have you taken it off and inspected it? It may just be a case that there is some crap stopping the bimetallic strip from releasing when it cools down.

rb30 fans are a direct fit to the rb26 hub, they are bigger as well, so more cooling!

no, 30 fans make more noise but dont flow more. they flow the least air and make the most noise of all RB fans. as said just find another RB hub, make sure it mounts in the same spot and bolt it up

Cool, thanks mate, ive just been out and pulled the fan off, metallic strip looks fine but fan is very hard to turn, its not totally siezed but I imagine it should be a lot more free spinning than what it is...thing was seized on the water pump snout real good too!....

Edited by NSNPWR

Ok, what ive discovered so far....

The RB30 hub does not accommodate the 26 fan, the 30 hub is smaller and the bolts do not line up...even if it did fit see below...

The RB30 hub assembly has a shorter snout on it meaning the fan sits closer to the motor, as a result, the fan blades foul on the top radiator hose...

So, what I need is a hub that has a longer snout on it...would like to see pics of RB20 or 25....might even call Nissan tomorrow and price up a 26 hub...Lol...

Any gurus know if its possible for the fan to lock up only once its hot???

Edited by NSNPWR
the RB30 hub has same bolt bolt pattern on both the water pump side and the fan side as RB20/25 so if that doesnt fit then neither will 20/25 one.

Cheers, good to know but its only the length of the shaft/snout that prevented me from using the RB30 fan and hub assembly...I found some 2nd hand 26 hub assemblies on Ebay for $200+ delivered! No guarantee they'll be any better than mine.

Edited by NSNPWR
Never really understood why you would choose thermo's. All that extra wiring, relays installation sounds like a big pain in the bum. Especially if you get 0 or marginal improvement.

well there are lots of reasons why...

they are lighter and thinner

they allow more engine bay room for intercooler piping, thicker radiator, etc

they can be fitted in front or behind the radiator, or you can have a v-mount arrangment

they do not rob the engine of hp

they do not affect the centrifugal force of the engine (if you have modified the blades to clear piping, it be putting uneven strain on the water pump shaft)

they will not get thrown off when your waterpump shaft snaps (see above), totalling your radiator, denting your bonnet, smashing the fan blades

they only come on when needed

they can be running while your car is off and in the pits cooling down

they look neater

they can be made one with the radiator.. removal is as easy as disconnecting the wires and removing the whole get up.

the wiring is not difficult at all

they give you one extra gizzmo to play with if you get a fan controller

you think that installing relays and wiring is a pain... i think constantly undoing the engine fan to get the radiator and shroud out, water pump, timing cover etc. is a massive pain in the knuckles and forearms.. not to mention rounding off the 10mm nuts that have to be done up tight so the fan doesnt fly off, or bending the 6mm studs by levering against them to undo the tight 10mm nuts.

to say that thermo fans do not work as effective as the engine fan is a bit ridiculous.. 70% of the cars these days use thermofans.. all fwds do, wrxs, evos, commodores, falcons, lots of euro cars do etc.. they work just as good at cooling as any engine fan.. without the power robbing.

i have a very good complete fan with good clutch pm me if you want it.. i will be going the thermo route for the reasons above.

cheers

Linton

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...