Jump to content
SAU Community

Recommended Posts

1995 R33 GTR V-Spec Midnight Purple

For those of you that followed the build thread, here's the finished product. (clutch was able to be adjusted and now easy as to drive)

Totally regretful sale but im just not going to be in the country to enjoy it.

Fresh total mechanical rebuild from intercooler to exhaust tip, just run in.

HKS step2 2.8 stroker, full counter crank and rods kit, CP pistons.

Brand new head from Nissan, Jun 272 in and ex cams, 10.8mm(?) lift, special retainers and all the jazz needed to support the cams and high revs, heads extensively ported.

Big dollar hypertune plenum and single throttle body setup

Custom alloy breather tank etc

Jun oil pump, N1 water pump, cant recall the brand of balancer, but its a good one.

Trust sump extension.

Turbonetics GTK-850 turbo and big Turbonetics external gate

OS Giken 2 way front diff

OS Giken cross mission 5spd gearset with input shaft 800+hp rated, quick shift kit

OS Giken triple plate clutch 800+hp rated

Carbon fibre super lightweight tailshaft (not currently fitted)

ATTESSA system fully inspected with all fluids changed

V-Spec active rear diff

engine made 760HP on engine dyno at ~25psi with screamer pipe

Current street setup with wastegate plumbed back into HKS 4inch exhaust

Huge alloy radiator, disgustingly thick Trust intercooler.

Fuel system to cater for 1000hp, in boot setup as in pics,

1000cc HKS injectors,

HKS fuel rail,

splitfire coilpacks

Motec M800 ECU

Genuine 18inch Impul rims all round with new tires

V-Spec shocks with Lovells springs

V-Spec Brembo's all round

Midnight purple paint in excellent condition. Will try and get some pictures with better light to show off the purple.

Excellent condition original interior with almost no wear in the usual places (seat bolsters, steering wheel etc)

66850kms on the car, 1050kms on the engine including the run in

12 months SA Reg including custom silver on black godzilla plates

All mechanical parts brand new and all work done exclusively by James Sutton at Nisspeed Performance Engines.

Silly money spent and not used since run in. NO EXPENSE SPARED ON THIS BUILD.

Relocating overseas, asking price $45,000, however ALL GENUINE OFFERS CONSIDERED.

Test pilots forget it, will not be entertained. Genuine buyers only.

I WILL NOT BE CHECKING BACK HERE REGULARLY. Please direct all enquires to email:- [email protected]

DSC00039a.jpg

DSC00044a.jpg

DSC00053.jpg

DSC00054a.jpg

DSC00058.jpg

DSC00062.jpg

Edited by SLY33

^^yes I do have a stubby shifter but this big one is real easy to shift.

Balancer is ATI

Awesome power, car sounds like a jet taking off. Has an idle like no other street GTR ive heard, can really hear the cams. Will try and hook up a youtube link...

2 Way front diff means it doesnt change lanes on you from torque steer when you nail it, this thing tracks straight ahead, just hold on!

Now listed on carsales, more pics going up soon.

After bring it home Ive driven this car just TWO short times around my suburb! I fly back overseas tomorrow for good. Spent a BOMB building this car, this is how people get crazy bargains. Just try building it yourself, set a budget and you end up doubling it once your done. And dont forget the headaches that you didnt see coming!

This car is COMPLETE. Real sweet to drive.

Edited by SLY33

f**k!

for my sake, i hope its still for sale in 6 months time!

but i wont be suprised if its gone and youll we hoping its gone lol

goodluck!

Edited by Import S13
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...