Lowering Stock 260rs Suspension

[JZZ20]

Had a look at my suspension after rumours that it can be lowered as a standard feature.

I have a set on bilstein struts in there and they have grooves for the spring seat to be lowered. How exactly is this done? Is there a DIY thread for it that I cant seem to find? If not I may type one up with pics if and when I lower it. It seems like i can lower it about an extra 30mm. Should be enough to satisfy me.

[KiwiRS4T]

Haven't done it myself got shock shop to do it and then alignment but its probably easier to pull them out and then you may need a spring compressor. Posssibly someone here has done it without pulling them out?

My current ride height (bottom of guard to wheel centre) is 340 front 350 rear.

[260tech]

Check out Sydneykid's suspension thread, (stickied) All the info in there.

Cheers GW

PS: Bilsteins are not standard on Stagea's so suspension has already been changed, probably ride height has been optimised at the same time?

Edited February 25, 2010 by 260tech

[JZZ20]

Yeah, I gathered the Bilsteins werent stock, i meant in the way that its still stock setup, not adjustable coilovers etc etc.

I'll go have a brouse through all the pages and see what I can find, cheers