Jump to content
SAU Community

Recommended Posts

Guest 33GTS25

this may be a tip that most people know but there will be some amongst us that dont know it.this tip was given to me by a mate who's dad used to own a car yard.

have you ever finished washing and polishing your car and stepped back to have a look at your baby but only to be upset that your tyres are dirty still and detract from the overall gleam. if so

pour a little armorall into a jar and brush onto the sidewalls using a small paintbrush i.e 1" brush(buy from crazy clarks for 50c). armorall will have the consistency of milk when painting but just keep walking around the car touching up as necessary. this will bring the tyres back to that shiny new look they had when you first bought them and when re-applied for a couple of coats the sheen just gets deeper without having to worry about runs etc that you get with tyre black(and its cheaper).

be careful to not paint past the sidewalls and onto the tread pattern as we all know how slippery armorall gets.

hope this helps at least one of us.

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/
Share on other sites

Guest 33GTS25

if its something really greasy why dont you take each wheel off and try to scrub it with laundry powder, the powders granules should help lift the grease without scrathing your sidewalls.

i.e wet the tyre first pour a little powder on the tyre and start scrubbing a 30cm section at a time this will give you an indication of how you are going before you atempt al the tyres

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10295
Share on other sites

pour a little armorall into a jar and brush onto the sidewalls using a small paintbrush i.e 1" brush(buy from crazy clarks for 50c). armorall will have the consistency of milk when painting but just keep walking around the car touching up as necessary. this will bring the tyres back to that shiny new look they had when you first bought them and when re-applied for a couple of coats the sheen just gets deeper without having to worry about runs etc that you get with tyre black(and its cheaper).

hope this helps at least one of us.

rod[/quote:d776b278ca]

Hey Rod,

How long does it usually stay black for? I used to do this but then found that it didn't last that long. I currently use hmm.. I can't remember what its called. Its made by Turtle Wax in a green bottle and it's called ***** Extreme. Pretty good stuff as it actually makes kinda like a silicon clear coat over the tyre hence not affected by water.

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10296
Share on other sites

Guest 33GTS25

xrsist. i gotta admit that i dont know how long it lasts, as yesterday was the first time i have done it, but then it only takes 5 minutes to run around the car and reapply after you have finished your weekly wash/vacuum routine

i haven't seen this turtle wax stuff but it may also be a good option, remember that nothing will last forever though.

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10297
Share on other sites

Guest 33GTS25

jimbo, if your neighbours haven't commented yet on your dedication to your car then you are not committed enough.

other members of the complex that i live in know that i wash every saturday afternoon unless there is a cruise and i do it in the morning. the advantage of this is that they make sure there car is not in my way. it helps being a 6'1" black man sometimes :twisted:

you'd be surprised the many applications that washing powder has :wink:

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10299
Share on other sites

Guest 33GTS25

well jimbo you must have the rest of my body as i seem to be white from the waist down. i.e i think i must be hung like my mothers side of the family :lol:

if people comment on doing each wheel at a time, you should tell them that your baby is in foal and will be coming back with a godzilla, this will surely confuse them even further

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10301
Share on other sites

nah Jimbo, it's just spray-on stuff! Very lightweight....sprays on like...errr for want a better word....hairspray LOL :lol:

Doesn't last very long tho - it's more just to pretty it up for the day, and it doesn't clean them either, you have to apply it to clean tyres.

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10306
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...