Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

Not long to go now, have got a lot of new mods on the car & am keen as mustard to see what result they give; Disco potato, 660cc inj, Nistune, Lightweight flywheel, Hd Clutch, new suspension geometry & a lightened stereo setup in the boot.

Ran 14.4@97mph with 200rwhp-now got 300rwhp so am hoping for 13's

Not long to go now, have got a lot of new mods on the car & am keen as mustard to see what result they give; Disco potato, 660cc inj, Nistune, Lightweight flywheel, Hd Clutch, new suspension geometry & a lightened stereo setup in the boot.

Ran 14.4@97mph with 200rwhp-now got 300rwhp so am hoping for 13's

13's easy, I ran a 13.6@107mph last time with less than 300rwhp with a shitty 60ft, also the 31 is heavier than a 32.

Only change to my car this time around is a new turbo (less lag, more power) and have gone to an external gate setup for better boost control.

13's easy, I ran a 13.6@107mph last time with less than 300rwhp with a shitty 60ft, also the 31 is heavier than a 32.

Only change to my car this time around is a new turbo (less lag, more power) and have gone to an external gate setup for better boost control.

Cheers- gives me an idea of how she should go-Rb20's represent :P

I will have to investigate further, it is almost brand new and rated to 1000hp but somthing is amisss with it, will likely need a trip to the ogre to sort it

Let me know what you find out mate

I will have to investigate further, it is almost brand new and rated to 1000hp but somthing is amisss with it, will likely need a trip to the ogre to sort it

Is the ogre Daniel? Rings a bell.

Cheers- gives me an idea of how she should go-Rb20's represent :down:

I hope there will be a few RB20s there, i ran a 12.24 at jambo, it was a poor launch and should of run a high 11.

doing a few more mods now and should have another 100 - 130hp and few suspension changes, could it be possibe

for a RB20 R32 to run a 10?????

Whats the latest i can enter and pay?

I hope there will be a few RB20s there, i ran a 12.24 at jambo, it was a poor launch and should of run a high 11.

doing a few more mods now and should have another 100 - 130hp and few suspension changes, could it be possibe

for a RB20 R32 to run a 10?????

Whats the latest i can enter and pay?

Do you want me to add you to list?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...