Jump to content
SAU Community

Recommended Posts

:(list of some parts and standard items i wish to sell from build-up :worship:

- standard radiator from s2 R33 RB25DET excellent condition $150 SOLD

- standard s2 R33 RB25DET block no head, block is in excellent condition, $800 SOLD

- Gizzmo IBC Electronic Boost Controller excellent condition comes with everything $250

- standard in-tank fuel pump s2 R33 very good condition $50 SOLD

- s2 R33 RB25DET auto-trans + pedals excellent condition stage 2 shift kit been serviced new filter trans-fluid etc from mike at M.V. automatics $500ono

- s2 R33 RB25DET impul auto ecu removes speed limit cut rev limiter goes to 7.200rpm i think been awhile since i have been on the dyno give or take boost cut removed or moved i was running 14.3psi excellent condition $200

- 2x standard boost solenoids good condition $15 each

- s2 R33 whole complete A/C from the engine bay ill check with my mechanic excellent condition $400ono

1 x Brand New Blue Castor Rod Bushes noltec or nolethane $65 pick-up or $70 posted.

1 x complete set off standard R33 s2 brake lines front + rear used but in fine condition no splits kinks etc $50 pick-up or $55 posted.

2 x standard R33 rims good for drifting etc camber wear on tread $70 pick-up only.

................................................................................

.................................................................................

...........................

measurements in INCHES for thermal flex left overs...

1 x Thermal Flex (RED) 8" long X 2" wide------------------------ $15

1 X Thermal Flex (BLUE) 6" 1/2" long X 2" 1/2" wide------------ $15 ------------$60 for all 3 pick-up or $65 posted

1 x Thermal Flex (BLUE) 13" Long x 3" Wide--------------------- $30

................................................................................

.................................................................................

.............................

1 x i believe its the heater unit minus the heater core $60 pick up or $70 posted.

1 x i got this from a group buy a while back black faced 300km/h speedo set in psi no 300km/h tho i have it in my car but i put the 180km/h speedo with the set, boost gauge on tachometer is in psi and oil pressure is in psi as-well + new hot/cold gauge and fuel level so everything except the 180km/h is new the set cost me $100 + postage so i guess it would be fair to ask for $50 pick-up or $55 posted.

1 x 1996 s2 R33 rb25det Throttle body good condition $60 pick-up or $65 posted

1 x R33 Skyline Standard Genuine Nissan Dump Pipe $30 pick-up or $35 posted

1 x R33 s2 Skyline nissan genuine rubber intake pipe used, good condition no perishing, comes with stock BOV plumb back hose $50 pick-up or $55 posted

1 x s2 R33 Cross Over pipe with b.o.v. $55 pick-up or $60 posted

1 x R33 s2 Original Nissan intake manifold (plenum) comes with top and bottom half rubbers, bolts, everything needed to fit it up., no cracks or leaks, reason for sale is put greddy intake on. $75 pick-up

6 x s2 R33 GTST 370cc injectors, all working when taken out of car, just been removed for nismo injectors these have only just been taken out and are all in 100% working and flowing condition!! comes with rail. $150 pick-up or $155 posted.

most items can be posted some cant...

contact me on here or e-mail me at ([email protected]) or call me on (0401409575Allan)

i will start uploading some pictures tonight if i have got some time..

All items located in : Adelaide,SA

Contact me on (0401409575 Allan) or pm-me parts can be delivered via freight/courier at your expense or pick up in Adelaide,SA parts are with my mechanic so can organize it any-time.

most prices are negotiable.!

Regards.

Allan.M

1 x R33 s2 Skyline nissan genuine rubber intake pipe used, good condition no perishing, comes with stock BOV plumb back hose $50 pick-up or $55 postedSOLD

1 x Thermal Flex (RED) 8" long X 2" wide------------------------ $15

1 X Thermal Flex (BLUE) 6" 1/2" long X 2" 1/2" wide------------ $15 ------------$60 for all 3 pick-up or $65 posted SOLD

1 x Thermal Flex (BLUE) 13" Long x 3" Wide--------------------- $30

- s2 R33 RB25DET impul auto ecu removes speed limit cut rev limiter goes to 7.200rpm i think been awhile since i have been on the dyno give or take boost cut removed or moved i was running 14.3psi excellent condition $200 SOLD

- s2 R33 RB25DET impul auto ecu removes speed limit cut rev limiter goes to 7.200rpm i think been awhile since i have been on the dyno give or take boost cut removed or moved i was running 14.3psi excellent condition $200 SOLD

back up for sale due to time waster

................................................................................

................................................................................

.

...........................

measurements in INCHES for thermal flex left overs...

1 x Thermal Flex (RED) 8" long X 2" wide------------------------ $15

1 X Thermal Flex (BLUE) 6" 1/2" long X 2" 1/2" wide------------ $15 ------------$60 for all 3 pick-up or $65 posted

1 x Thermal Flex (BLUE) 13" Long x 3" Wide--------------------- $30

................................................................................

................................................................................

.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...