Jump to content
SAU Community

Recommended Posts

R32 Skyline Club are having their Third cruise!

This will be a Morning Run, The destination will be Pinjarra Bakery, for those who have not been they make unreal pies & sausage rolls! They shut at 2pm hense the early start. The Cruise will not be a hwy run, its more of a forrest drive eventually getting to Pinjarra.

Place: Midland Central - Clayton Street, Midland. Out the front of JB Hi Fi.

Time: Sunday 28th March 2010 - Meet at 8:30am for 9am leave

Bring a tank of fuel, I cant stress this enough, we will go past a couple of fuel stops but we are not stopping at any.

The Cruise is intended for owners of R32 Skylines,

however I am not going to tell you to leave if you bring a different model of Skyline, but Skylines only please.

Dont expect to come to a race, the club prides itself with just enjoying coming out and just being able to drive.

See you there!

Link to comment
https://www.sau.com.au/forums/topic/311792-28th-march-r32-skyline-club-cruise/
Share on other sites

i should be able to make this as long its a skyline run my 32 is back on the road after my last cruzz and a meeting with a commodore up my ass but sound good and the bakery is GOOD

That's my birthday :down:

Though I do drive a R33 GTR, I did notice you won't tell me to leave, but I'd feel stink if I was the only tool in a 33 at a 32 club cruise

It's alright dude, I'll be there in my StagBus as the 32 is still without an engine :huh:

hey buba come with us bro if u want its up to you

and i just got that 30 blok yeah :blink:

Naice!

I'm hoping to have the CB installed in teh StagBus by the weekend (programming cable just rocked up :P) and *hopefully* some new front brakes! so I'll be keen to give them a workout ;)

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...