Jump to content
SAU Community

Recommended Posts

  • 1 month later...

i've got one sourced thats had the wires and loom cut from compliance.. but the guy assures me u just solder them back together and everything is all fine cos thats what he did with the other one in the pair. worked fine apparently!

anyone done this before? :)

i've got one sourced thats had the wires and loom cut from compliance.. but the guy assures me u just solder them back together and everything is all fine cos thats what he did with the other one in the pair. worked fine apparently!

anyone done this before? :)

Hey bud the person you have sourced them through is me lol... Anywho ill send through my details asap!

Edited by Ceffy_SA

No probs, in regard to the new globes you need just get these like i did, cheap as and work really well, order the 55w versions too their not to bright, i just went the 6000k type.

http://cgi.ebay.com.au/D2S-D2R-Xenon-HID-4...=item45f289d2c7

i have tried 6000 and 8000. i prefer the 8000 as the 6000 are brighter and whiter, and the 8000 were bluer and less nasty on the eyes! :)

why all of a sudden 30$???? lol i bought them 6 months ago for $60!!!! bastards! haha

will have to buy some while they're cheap! :D

  • 2 weeks later...

i've installed the new ballast, but my globes are waiting to arrive (and i didn't want to test it with my sole working globe :P )

turns out you have to cut the ballast out, and solder a new one in (its not just a swap out job like i thought)

as the plug on the end of the loom will not fit back through the hole without having to "un-glue" your headlight.

big props for Scottynm35 for giving me a hand! i owe u one two dude! :P

  • 2 weeks later...
got my new globes today.. put one in, and nothing.. :)

might have to replace the whole headlight.. :P

Mmm, sorry to hear mate, at least it didn't cost you too much to try and fix it. How much is a headlight going to cost?

i'm thinking i'll go with an aftermarket D2R HID kit now. ($130 + install) pretty sure i'll be fine!

better than driving around all lop-sided without one headlight!

pretty sure if they see my engine bay, they aren't gonna say anything about the headlights cos they'll be too busy looking at the other toys :) hahaha

Edited by atomaly

i also heard that it "sometimes" makes a difference if the green wires are soldered the wrong way around on the ballast?? due to polarity or something.

bad news is, my other headlight is flickering now...... :P i'm thinking this D2R aftermarket kit is looking better and better

okay, took it to auto electrician,

my newly installed ballast DOES work :bunny: it blew a fuse somehow when i was installing it.... only problem now is my other one is on the blink .. :| comes on then turns off after a short while....will try swapping the globes around...!

i know :) very happy that it was just a fuse!

and i bought a pair off ebay, but they sent 1x8000K and 1x10,000K. i was dumbfounded..

so they're sending me another 8000K so they match what i requested (somewhere between China and Aus atm)

so that gives me a non matching spare. :blink: haha better than no headlight

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
    • So 10/10 times that code is coil packs? I mean if that's the case ill drop the $400USD or so to replace them. I didn't know these cars threw codes before the issue became an issue.
×
×
  • Create New...