Jump to content
SAU Community

Quick newbie question...

tomaddo

By tomaddo,
in Engines & Forced Induction

 Share

Recommended Posts

tomaddo Newbie

tomaddo

Posted
Posted

Hi guys. Been scanning through old posts but cant seem to find the questions im after.

Im trying to choose between an r32 gtst and an r32 gts4. Obviously the 4wd of the gts4 will be an advantage on the strip etc but does the extra weight make a big difference?

Can anyone tell me the stock 0-100 times of these 2 cars?

Is it possible to get the gts4 into a WRX beater pretty easily? Id be after a 0-100 time of around 5 seconds and 1/4 time of 13s. How hard is this to get?

Are the gearboxs on the 4s the same as the gtrs and if not how strong are they?

Any answers appreciated.

Tom

Link to comment
https://www.sau.com.au/forums/topic/31209-quick-newbie-question/
Share on other sites
druzilla32 Mentor

druzilla32

Posted
Posted
Anyone?

both cars in stock form - the gtst is faster as it is i think 100kg lighter.

BUT that is if they are both stock.

I can keep up with a 12sec rex up to about 85kmph, after that its gone tho.

im preety sure the gtr box is a bit stronger???

but the gts4 box is still a strong one.

gts4 is quite amazing from the lights.. i usually take off at 6500rpm and ride the clutch a little... it chirps a bit but that is all.

JimX Grand Master

JimX

Posted
Posted

The GTS-4 has the same box as a GTR. A popular mod is to do an RB26DETT conversion, with which you will end up with pretty much a GTR but with skinny guards (think sleeper). It's pretty costly though, so if money is a concern an RB25DET conversion might be better.

Warpspeed Experienced

Warpspeed

Posted
Posted

The GTST or GTS-4 is obviously heavier, but the drive-line is extremely strong. Buy a Rex and you will destroy clutches and gearboxes faster than you would ever believe possible, if you drive it hard. The Skylines are indestructible, and take some serious mods without becoming unreliable.

The GTS-4 gearbox used with the RB20 has different ratios, but is otherwise identical to a GTR box, and is just as strong. Same with the diffs.

Nexus9 Grand Master

Nexus9

Posted
Posted
i had a rolling start drag with a new STI the other day in my R33 and i was pulling away from it, WRX's arnt that quick after they launch imho

Depends what's been done to them (like any car i guess)

But it is my 2nd fav car to chop, after the commonwhore that is of course :headshot:

rev-tech Newbie

rev-tech

Posted
Posted

sorry to hi-jack the thread a little, but i'm in the process of bringing an R32 GTS4 over from japan (read getting the money together :Oops: )

but will be performing the RB25DET swap over on it (along with a decent level of modifications), anyway, my question is will the RB20DET g'box bolt up to the RB25DET block easily or is there some work that needs to be done?

thanks

Shane

Sydneykid Grand Master

Sydneykid

Posted
Posted

Hi Shane, the issue here is the 4wd sump is different (wider) to carry the front diff and drive shafts. The 4wd block is therefore a different casting to allow the sump to bolt up. Basically you can't use a 2wd block and expect the 4wd sump to bolts up. There are 4wd blocks in RB20, RB25 and RB26 and 2wd blocks in RB20, RB25 and RB30.

So if you want to put an RB25 into a GTS4 then you have to use a 4wd RB25DET out of a Stagea. Not that common. Or get an RB25DE (non turbo) 4wd block out of a R33 GTS4 and swap the internals from a 2wd RB25DET.

That's why the common upgrade for a GTS4 is an RB26DETT, it's more expensive but much simpler.

Hope that helps

rev-tech Newbie

rev-tech

Posted
Posted

Sydneykid, thanks for that info, damn i always thought the R33 GTS4 was turbo'd, oh well.

i was going to get the internals re-build anyway so the 33 block may be the way to go (balanced/shot peened crank and rods, forged pistons etc etc)

the only other option i can see is to have a custom sump made up but have it modeled off the original 4WD RB20 one. that way a few baffles could be put in, stop the oil surging at the track :(

Shane

edgasket Contributor

edgasket

Posted
Posted
Sydneykid, thanks for that info, damn i always thought the R33 GTS4 was turbo'd, oh well.

Yeah, i read somewhere ( probably a thread here :( ) that Nissan didn't make a turbo'd R33 GTS4 because they thought people might buy it instead of a GTR and they did want the cars to be that similar?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • joshuaho96
      Ethanol Content Sensor - Always at 11%?

      By joshuaho96 · Posted

      The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • GTSBoy
      R34 Skyline climate control unit transistor

      By GTSBoy · Posted

      It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...