Jump to content
SAU Community

Recommended Posts

Hey guys, just wondering of anyone noes of any easy-to-do ways to increase horsepower on your car, i no of a few but if any could help would be greatly appreciated, i spoke to this at a performace shop who told me some but i cant remember but, he said there are plently of site of it on the net, but i cant seem to find any, if any one can help me with this, would be great

thanks

Link to comment
https://www.sau.com.au/forums/topic/31270-more-power/
Share on other sites

Being an exhaust fitter that last pic doesn't make me laugh, it makes me cry! WHY!!! WHY!!!

The only free hosrepower that I can think of is a Turbo as it gets its power from spent exhaust gasses.

Here is some mods for N/A engines that might improve power:

Cold air induction, modify and enlarge airbox inlet/outlet and put a bell mouth on the outlet, better flowing airfilter (or pod and cold air box/partition), remove all plastic corrugated intake pipes and make smoother versions out of aluminium tube and smooth rubber bends or aluminium bends and rubber tube (try not to remove vacuum resonance chamber on intake pipe or increase pipe diameter excessively), clean all carbon and oil deposits on throttle body and plenum (or fit larger throttle body or bore out and fit larger vane), Remove any breathers that run from engine to intake and fit oil catch can setup, Next time you change spark plugs choose ones that have a small electrode diameter as this makes it easier for a spark to be produced (reducing the gap slightly also helps in making spark stronger) Ignition Advancing the timing a couple of degrees in some engines might make more power but this is dependant on what octane fuel you use, next time you change engine oil try a fully synthetic high performance friction modified oil (make sure you use the right viscosity of course) this might help reduce friction and drag on engine components, fitting a lower temp thermostat might help drop engine temps for a slightly cooler intake charge, extractors coated in ceramic or wraped in thermal tape, high flow converter and a better flowing exhaust than the factory items will make more power.

Try using some in tank injector cleaner (or get them removed and ultra-sonically cleaned and tested professionaly.)

Run some octane booster/tolulene to raise the octane dont use NOS on a stock engine unless you want a stuffed rings and clutch.

NOTE: This is just a guide, I have no responsability for damage caused to you or your vehicle or the speeding fine that you will get while testing your mods.

MEGA

Link to comment
https://www.sau.com.au/forums/topic/31270-more-power/#findComment-632052
Share on other sites

here are some easy ways to increase horsepower:

- straight through mandrel-bent exhaust, big, least amoung of bends as possible

- higher flowing air filter than stock

- remap the ECU or get a chip for your ECU

many cars have characteristics that make gaining horsepower easier (eg if you have a gtr then replacing a tiny hose can unlock a great deal of power). a honda site may be able to provide you with some sort of help with this as here we generally only know RB engines (as they're better)

Link to comment
https://www.sau.com.au/forums/topic/31270-more-power/#findComment-634103
Share on other sites

here are some easy ways to increase horsepower:

- straight through mandrel-bent exhaust, big, least amoung of bends as possible

- higher flowing air filter than stock

- remap the ECU or get a chip for your ECU

many cars have characteristics that make gaining horsepower easier (eg if you have a gtr then replacing a tiny hose can unlock a great deal of power). a honda site may be able to provide you with some sort of help with this as here we generally only know RB engines (as they're better)

^ What he said :D

Link to comment
https://www.sau.com.au/forums/topic/31270-more-power/#findComment-634119
Share on other sites

how do u get a chip for the ecu and how mcuh is it? and how does it work?

go to:

www.unichip.com.au

i hope that link works as i made it up but i'm sure that its their site...

costs about $1000 fitted. it changes the air/fuel ratios and timing that the car uses to create the most efficient combustion in your engine. more efficient = more power. the stock ECU is more aimed at protecting the engine and uses too much fuel, thus if you can slightly reduce the amount of fuel (or 'lean out the mixture') then you can gain an extra 10-20kW or so depending on your engine.

easy, but expensive.

good luck...

Waz.

Link to comment
https://www.sau.com.au/forums/topic/31270-more-power/#findComment-635530
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Details: Turbo Borg Warner EFR 9180 with 1.05 rear housing Upgraded TurboSmart integrated BOV Sanded and powdercoated compressor cover in gloss black Elbow welded with wiggins clamp Speed Sensor(Not included) (Can include oil drain(heat wrapped + titanium intake pipe with almost new filter for a tad extra). Manifold: 6 Boost RB26/30 twin scroll manifold  e-MAP ports drilled into both scrolls(I was using the TAARKS EMAP KIT) Turbo is in excellent condition. Always used Penrite 15w50 Racing oil(Changed less then 2000ks). Also using the Turbosmart OP regulator and filter. Downpipe: 4inch Stainless steel with VBand inlet and outlet clamps(included) Heat wrapped Dual ports for Dyno/Wideband usage Will throw in free 2.5 inch intercooler pipe(2.5inch From turbo outlet to 3.5 inch intercooler) - Powder coated black. Turbo made 563rwkw on mainline hub dyno at around 24-25psi boost - Pump fuel. Will def make over 600kw on e85. Didn't bother as my e-MAP was through the roof with my setup sitting past the choke line. I have a cnc ported and fully built head on my 3.2. Turbine speed saw max of around 109k rpm. I'm running this on my R32 GTR, with AC, and the original power steering pump. The manifold clears the AC lines, ABS, and everything else. Although I had new AC lines because I just wanted new ones and I heat wrapped them as well. This will make more power on a slightly lower capacity motor with a higher PR. And I have since upgraded to a G45-1500. Have pics and videos if need be.  Absolutely nothing wrong with setup. Turbo is in perfect condition. No shaft play or oil leaks at all. All the work was professionally done. The transient response of this is fkn amazing. I cannot rave more about this turbo. If I wasn't chasing 4 figures, I would have kept it. $5000 NZ. Located: Auckland, New Zealand.    
    • I particularly like the look of the John Player Special team. (Thumbnail isn't different but hit play for the clip)  
    • Such a cool collection of cars back then.  
    • Mystery solved, thanks bro Bit of a strange mix, but i dont mind it, still looks good. 
    • nah no problems with bearings or hubs.  just the water pump leak and my AC death
×
×
  • Create New...