Jump to content
SAU Community

Honeymoon on the goldcoast


Recommended Posts

Guest KILLER-T

Hello people

Im from the Western Australia forums and i am planning a Honeymoon on the gold coast in late March and was thinking you guys could recommend a nice hotel to stay in.I have had a look around on the net at hotels and sofar Jupiters casino or the Sheraton Mirage look real nice but i dont realy trust pic's on the net or in travel brochures so any info would be greaty appreciated.

:(

Link to comment
https://www.sau.com.au/forums/topic/31329-honeymoon-on-the-goldcoast/
Share on other sites

try pacific plaza.

its an apartment facing the beach and very close to the main shopping attractions. my gf loves waking up early and just hanging by the balcony, looking out into the sea and slipping her lemon ice tea...

i just watch tv....

glenn

palazzo versace i got engaged there and we were lucky to get an upgrade to imperial suite(3500 a night) it is on the gold coast spit cant go wrong close to fishermans warf which is a great social are full of pubs and food all on the water.Check it out on palazzoversace.com.au

Honestly the best place on the coast undesputably.My other favourite is Suncity a really cool place has steam room,spa, sauna all the perks without the glamourous name and price tag of versace.My missus works for tourism queensland so if u got any other questions message me and i will hel you out.

try pacific plaza. its an apartment facing the beach and very close to the main shopping attractions. my gf loves waking up early and just hanging by the balcony, looking out into the sea and slipping her lemon ice tea...

lol, wasn't that one of the ones some kid fell off the balacony and died during schoolies this year?

Not that i've stayed in any around there - but i'd recommend somewhere away from Surfers at all. Depends what you want, but its pretty trashy at times and filled with lots of 16-20 year olds. Broadbeach and other places are much nicer and relaxed, and its only a short bus trip to surfers anyhow.

I stayed at Crowne Plaza (used to be the Parkroyal) in broadbeach about a year ago. Was very nice (17th floor ocean view, huge bed, spa in room, balcony). Was very nice. Booked it on wotif.com - no worries....

depends what u are after too. if you want a quiter time, go for units further south at burleigh heads, kirra, coolangatta.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...