Jump to content
SAU Community

Recommended Posts

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

I read your PM. Doesn't mean you'll get a reply to it.

Could be the fact that you don't have VALID reply to it?

Your silence or lack of response reveals something significant doesn't it?

And why the hostility mate? I was courteous enough to end my sentense with a "please" in my PM

You immediately went on racial based insinations

Bullocks.

Now i've taken my time to read the forums rules thoroghly and just can't seem to link anything in it to my closed thread.

Could you be kind enough to enlighten me with this matter and describe this specific rule i might have broken?

Edited by Barbarian
Could be the fact that you don't have VALID reply to it?

Your silence or lack of response reveals something significant doesn't it?

And why the hostility mate? I was courteous enough to end my sentense with a "please" in my PM

Bullocks.

Now i've taken my time to read the forums rules thoroghly and just can't seem to link anything in it to my closed thread.

Could you be kind enough to enlighten me with this matter and describe this specific rule i might have broken?

I'm not hostile at all. It's not that i don't have a reply - it's the simple fact of I've already described when the thread was closed.

If you need more, nothing i say will change that.

I get on average now 50 PM's a week. I don't need another 5 a day from someone who was out of line in my view, and refuses to see that.

There were several users reporting your post that took offence, decision was made based on moderator disgression at the time, action was taken.

As i said, if you do not agree, contact another Admin and air your grieveance with them.

They will then look at it, take your past warnings and so on into account (which follow a similar trend), and then decide based upon all that is there.

There were several users reporting your post that took offence, decision was made based on moderator disgression at the time, action was taken.

If that was the case you would have deleted that specific post of mine,

but since it didn't contain anything degrading, insulting any group of people.. you couldn't. I was merely posting the contents described in the given articles

So what do you have to say on Adzmax since well you're a Admin and you have a higher authority than him?

Edited by Barbarian
So what do you have to say on Adzmax since well you're a Admin and you have a higher authority than him?

The warning was justified. The message left attached to it, however, is a bit useless, as it doesn't give anything other than a personal opinion. We use the messages in the warning list as a general indicator of what a user has been warned about or is responsible for. Someone who has a repeat offense history is shown less tolerance etc. That kinda message doesn't help anyone.... I'm sure Adz will see to it that in future the messages he leaves on his warnings are objective and not subjective like that one.

This doesn't mean that warning is gonna be removed.

The warning was justified. The message left attached to it, however, is a bit useless, as it doesn't give anything other than a personal opinion. We use the messages in the warning list as a general indicator of what a user has been warned about or is responsible for. Someone who has a repeat offense history is shown less tolerance etc. That kinda message doesn't help anyone.... I'm sure Adz will see to it that in future the messages he leaves on his warnings are objective and not subjective like that one.

This doesn't mean that warning is gonna be removed.

Pull your head out of azz Shan for crying out loud.

Two warnings? For what exactly?

I am STILL waiting for a reasonable explanation where within my post it might have breached forum rules?

Show me forum rules, compare it with my post and give me some evidence to convince me... then i might STFU and take as it is.

Edited by Barbarian

Treat all members with respect and courtesy - We will ban any member(s) who make personal attacks, threats or mistreats any other member in anyway (discretion is up to the moderator at the time of the offence)

Saying someone is not credible because of their race is disgusting.

and that warrants TWO WARNINGS and the tread to be closed??

One from an Admin and another from a Mod who's intention is to get me banned? The only reason i can see of receiving two warning are because of the heading title i have used "Australia = Toilet" in my topic title and the fact that i was having a go at Australia describing my frustration on how much of a nanny state we have become and this has caused two arrogant individuals an emotional breakdown.

I can't see anything wrong within my post. No degrading words or personal attack, nothing racist about it just constructive criticism.

Adis, the name sounds like a Greek (i.e. Adonis McFist)

For your own sake and credibility, don't put Greece and the others in the same basket clearly because there's a world of difference between the Grecomans and the rest.

What Grecomans fraudulent, deceitful tendencies may have does not and should not be reflected on other Euro states, it's just the way Grecomans are by nature

Near-bankrukpt Greece a culture of corruption, $1 billion a year in bribes

March 2010

http://www.neurope.eu/articles/Nearbankruk...ribes/99469.php

Greece scores worst in corruption ranking

http://www.transparency.org/policy_researc.../cpi_2009_table

Edited by Barbarian

Take into account the entire thread, your past posts in the last few weeks in the section.

Warnings are given out "overall" as much as they are for a "single post".

Given you'd already had two warnings, you were not granted a informal warning via PM.

Take into account the entire thread, your past posts in the last few weeks in the section.

Warnings are given out "overall" as much as they are for a "single post".

Given you'd already had two warnings, you were not granted a informal warning via PM.

Oh dear son of rajab...

This has become a real comedy, sounds to me like more excuses than anything else.. sad really

Love how you're trying to waddle your way out of this, why do you need to abuse the power that was given to you to enforce for good reasons.

Edited by Barbarian
Excuses?

You asked for reasons - you've got them, now you won't accept them.

Oh well. That's the last from me on this topic.

It's just a complete bullocks of lame excuses, we both know that.

I advise anyone to check up on my posts in that thread and i can guarantee you that i was never out of line nor ever in Victoria sub-forum.

Really pathetic of you Ash.. you got emotional and went out of line, on top of that you didn't take action on a Mod who was also out of line when his sole aim was to have me banned.

Edited by Barbarian
It's just a complete bullocks of lame excuses, we both know that.

I advise anyone to check up on my posts in that thread and i can guarantee you that i was never out of line nor ever in Victoria sub-forum.

Really pathetic of you Ash.. you got emotional and went out of line, on top of that you didn't take action on a Mod who was also out of line when his sole aim was to have me banned.

Stop being childish and throwing silly comments around because you've been given another warning.

My decision was not emotional, don't for a second i care that much about dishing out a warning.

All that occured was - I log on, find half a dozen "reported posts" about the same issue, i acted. That is my job.

I do it day in day out, just part and parcel of Admin really.

As for the moderator situation, that has been dealt with.

Is there anything else?

Stop being childish and throwing silly comments around because you've been given another warning.

My decision was not emotional, don't for a second i care that much about dishing out a warning.

All that occured was - I log on, find half a dozen "reported posts" about the same issue, i acted. That is my job.

I do it day in day out, just part and parcel of Admin really.

As for the moderator situation, that has been dealt with.

Is there anything else?

Yes.

Why did you lie to me?

That's the last from me on this topic.
Guest
This topic is now closed to further replies.



  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...