Jump to content
SAU Community

Recommended Posts

Parting out a complete series 1 R33 GTST

If a part you are after isn't listed, just ask.

Parts are located in Ipswich, QLD

Postage not included - buyer to arrange own post for large items

PM, Post or text 0414 249 292 (only call after 6pm)

Engine/Driveline stuff

RB25det - complete engine with all ancilliaries - $1250 (has HKS cam gear, polished CAS and polished cam covers)

Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600

Garrett GT3582R exhaust housing, .82 - $250

Jun "style" inlet manifold, still over $800 new on ebay - $600

BMI 86mm billet throttle body - $250

Deatschwerks 740cc injectors (straight fit in factory rail) - $450

SARD FPR, with gauge and adaptor for factory rail - $150

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Performance-wise Oil cooler and filter relocation kit - $200

MSpec aluminium radiator, pretty sure it's 45mm - $200

KTS Intercooler, 600x300x100, 3" in and out - $200

FMIC, 600x300x70,3" in and out, BRAND NEW - $150

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - $350

Excedy twin plate clutch, plenty of meat left - $1000

Lightweight chromoly flywheel, good condition - $250

RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000

5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250

Splitfire coil packs, perfect working order - $350

JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - $100

Turbosmart Type 2 plumb-back BOV - $150

R33 non ABS diff, shimmed a few years ago, still nice and tight - $100

Suspension/Brakes

Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000

Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350

Adjstable Rear upper camber arms - $100

HICAS lock bar - $50

Front adjustable castor arms - $100

Front strut bar, polished - $100

Rear strut bar, factory - $100

Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - $300

Rear brakes, stock - $150

Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - $1000

Electronics

Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - $1000

Blitz dual SBC EBC, the older black one, dual solenoid good working order - $250

NISMO clear side winkers - $50

Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three

Pioneer CD/MP3 headunit, basic model, black, removable face - $50

Jaycar response 4ch amp - $100

Fusion 12" sub in box- $50

Body & Interior

Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400

NISMO GT shift knob, excellent condition - $50

Series 2 steering wheel, very good condition - $150

Series 1 headlights, sedan model with silver inserts, excellent condition - $300

Rear lights, black - $50

Series 2 rear wing, black, with boot - $100

Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - $250

Type M side skirts, good condition - $150

400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150

Type M rear pods, black, good condition - $80

Series 1 dash surround, very good condition, has been stripped and repainted - $100

Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100

Drivers side window switch panel - $100

Series 2 seats, front and rear, drivers side has tear in bolster - $50

Interior carpet and boot trim - $60

Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40

More to come as I think of it

Reasonable offers considered but lowballers will be ignored

Pics to follow

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

Other bits I have remembered

Garrett turbo beanie, fits GT35R and others - good condition - $100

Series 1.5 grill - the one with the mesh - $80

all body panels/doors and bonnet - $50 each

Factory DIN pocket with flap - $30

Climate control unit - $40

Dash cluster - 185000 kms - $80

Front reo bar - $100

rear bar, black - $80

clutch master and slave cylinders - $50

brake booster - $50

aircon condenser and fan - $50

more to follow...

any chance of pics of radiator, 70mm fmic, and lock bar? does the fmic come with pipes?

Pics of HICAS bar and radiator, no pic of cooler but it's a generic 300x600xXX, no piping included, but it do have piping suited for a highmount turbo and FF plenum for additional cost

Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three

pics?

No pics of the actual gauges but they are the same ones as shown in link

http://justjap.com/store/home.php?cat=400

post-8870-1269948985_thumb.jpg

post-8870-1269949006_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...