Jump to content
SAU Community

Parting Out A Complete R33 Gtst Series 1 - Lots Of Aftermarket Bits

Lazy-Bastard

By Lazy-Bastard,
in Classifieds

 Share

Recommended Posts

Lazy-Bastard Grand Master

Lazy-Bastard

Posted
  • Author
Posted
What's left mate?

Engine/Driveline stuff

RB25det - complete engine with all ancilliaries - $1250 SOLD

Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600

Garrett GT3582R exhaust housing, .82 - $250

Jun "style" inlet manifold, still over $800 new on ebay - $600

BMI 86mm billet throttle body - $250

Deatschwerks 740cc injectors (straight fit in factory rail) - SOLD

SARD FPR, with gauge and adaptor for factory rail - SOLD

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - SOLD

Performance-wise Oil cooler and filter relocation kit - SOLD

MSpec aluminium radiator, pretty sure it's 45mm - SOLD

KTS Intercooler, 600x300x100, 3" in and out - $200

FMIC, 600x300x70,3" in and out, BRAND NEW - $150

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - SOLD

Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - SOLD

Excedy twin plate clutch, plenty of meat left - $1000

Lightweight chromoly flywheel, good condition - SOLD

RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000

5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250

Splitfire coil packs, perfect working order - SOLD

JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - SOLD

Turbosmart Type 2 plumb-back BOV - $150 - SOLD

R33 non ABS diff, shimmed a few years ago, still nice and tight - $100

Suspension/Brakes

Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000

Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350

Adjstable Rear upper camber arms - $100 - SOLD

Front adjustable castor arms - $100

Front strut bar, polished - $100

Rear strut bar, factory - SOLD

Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - SOLD

Rear brakes, stock - $150 - ON HOLD

Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - SOLD

Electronics

Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - SOLD

Blitz dual SBC EBC, the older black one, dual solenoid good working order - SOLD

NISMO clear side winkers - SOLD

Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - SOLD

Pioneer CD/MP3 headunit, basic model, black, removable face - $50

Jaycar response 4ch amp - $100

Fusion 12" sub in box- $50

Body & Interior

Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400

NISMO GT shift knob, excellent condition - SOLD

Series 2 steering wheel, very good condition - $150 - ON HOLD

Series 1 headlights, sedan model with silver inserts, excellent condition - $300

Rear lights, black - $50

Series 2 rear wing, black, with boot - $100

Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - SOLD

Type M side skirts, good condition - $150

400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150

Type M rear pods, black, good condition - $80

Series 1 dash surround, very good condition, has been stripped and repainted - $100

Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100

Drivers side window switch panel - $100

Series 2 seats, front and rear, drivers side has tear in bolster - SOLD

Interior carpet and boot trim - $60 - ON HOLD

Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40

Ivonin Collaborator

Ivonin

Posted
Posted

Those surrounds, did you just paint them black again? Wouldn't mind grabbing a pic in a pm off you mate =)

Also, the handbrake surround, hows that? =P

Annnnnnd the front strut bar =D

Lazy-Bastard Grand Master

Lazy-Bastard

Posted
  • Author
Posted
Those surrounds, did you just paint them black again? Wouldn't mind grabbing a pic in a pm off you mate =)

Also, the handbrake surround, hows that? =P

Annnnnnd the front strut bar =D

I painted the surround with Tamiya model paint, specifically for plastic, it has come up quite nicely

Handbrake surround is in excellent nick and both gear and handbrake boots were replaced a few years ago

strut brace is still available

will PM pics in the next day or so

  • 1 month later...
speedfreak31 Explorer

speedfreak31

Posted
Posted

hey mate, cant pm yet. but can i get a price on:

steering rack with column from rack up to the bush before the firewall

clutch master and slave cylinder

brake booster

cheers

  • 2 years later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...