Jump to content
SAU Community

Recommended Posts

Just thought I'd pass on my positive experience with these guys. Some of you may remember that we had a members' night there early last year and were issued with some VIP cards.

Anyway, I rang to price some wheels, and ended up driving in (from the other side of Ipswich) to speak to Tony. As soon as I mentioned SAU he said "no worries, we'll look after you", and helped me select wheels and tyres. I'm not the most decisive person on the planet so this took a while, but Tony was quite patient. I decided against 18s because of recurrent cost (due to the number of kays I do) on Tony's advice.

Despite not having an appointment, the guys managed to squeeze me in and I drove out with a fresh set of 17x8 ROH 'Drift R' wheels and Falken 235/45ZR17 rubber, for a very competitive price.

I should also mention that they were VERY careful putting the wheels on, using a cross brace instead of air tools and ensuring that the balancing machinery didn't scratch the rims. To top it off, the car drives very nicely, not a single shake and the wheel sits perfectly straight.

The service was fantastic, the staff were friendly, and the price and quality of the product is outstanding. I am one happy customer :(

Link to comment
https://www.sau.com.au/forums/topic/31456-bob-jane-toombul/
Share on other sites

i needed 4 new tyres on my silvia/onevia as i'd worn the insides of the front and the rears were stuffed from last trip to the mt cotton skid pan. I picked up 4 2nd hand tyres, front were 225 and rear 265 in 18's for the car for $300. The fronts were pirelli p zero's and the rear were bridgestone S 02's. These were 2nd hand but they have heaps of tread left on them. It was great cuz like everyone else i was broke so shortly after xmas. This was thru a guy named michael at all round tyrepower near the albion overpass.

Link to comment
https://www.sau.com.au/forums/topic/31456-bob-jane-toombul/#findComment-637351
Share on other sites

Bob Jane at Toombul is about the only Bob Jane I have ever been to...and it was only out of necessity. They had great service and I will only use a wheel brace which they were happy to use for me.

The only other places I go for good wheels and even better tyre deal are Quickfit at Newmarket (Scott) or Yerongpilly (Jason). The Yerongpilly store also do Dunlop motorsport so you can get good track tyres for good prices.

If you are in the need for tyres due to better prices I would go and see Jason, just mention my name and he will help you out personally (not in the way some of you may like though...)

Cheers

Neill

Link to comment
https://www.sau.com.au/forums/topic/31456-bob-jane-toombul/#findComment-638181
Share on other sites

i need to get my wheel alignment done asap. are they any good?

dun take it the wrong way though... i have been down to BobJane at Taringa and they did my wheel alignment 3 times but was still terrible. had to take it down to TyreSelect to get it done properly.

btw, anyone knows TyreSelect new addy?

thks

glenn

Link to comment
https://www.sau.com.au/forums/topic/31456-bob-jane-toombul/#findComment-638268
Share on other sites

that sounds great guys almost funny.Every tyre shop will balance tyres and use what ever not to scratch your mags.Would you pay for a job if your wheels were scratched...????? Guys this is common service you will find from any reputable tyre shop.The only question to be asked from tyre shops is what is your price.....

Link to comment
https://www.sau.com.au/forums/topic/31456-bob-jane-toombul/#findComment-638305
Share on other sites

i need to get my wheel alignment done asap. are they any good?

i just got a wheel alignment done by nissan at woollongabba

serious, my car feels brand new

couldnt recommend them highly enough;

make sure they are doing a 4 wheel alignment also!

i picked up some new tyres coz my fronts had worn their insides off

pick up some tritech tyres (never heard of em, but apparently they are pretty good) for 297 each from goodyear at woollongabba

235/40/18's arent cheap :(

Link to comment
https://www.sau.com.au/forums/topic/31456-bob-jane-toombul/#findComment-639505
Share on other sites

was there today. called at 3 and managed to squeeze in an appt at 4 to get my wheels alignment done. great service & great conversation with Manny or Manuel :confused:

btw, SAU members do get a couple of dollars off the usual price.

paul - Manny/Manuel likes your 31 :rofl: he thinks its crazy.

Link to comment
https://www.sau.com.au/forums/topic/31456-bob-jane-toombul/#findComment-640066
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...