Jump to content
SAU Community

Recommended Posts

Available:

Update! 26/5/2004

Pictures HERE (click)

These parts are available. If it is not listed here then it has been sold or is not available. Please do not ask for parts that are not listed here or I will give you a ridiculously high price and after you've paid for it, I'll go to a wrecker and buy it really cheap and send it to you.

phorj now has all of the parts, please PM him with enquiries:

http://www.skylinesaustralia.com/forums/pr...do=newpm&u=1333

KYB Gear Climb struts. RS*R springs $300 ono for the front pair

Quarter Panel black (click) $150 each

Steering rack $100

K-frame $75

Power steering pump $40

or rack, K-frame and pump for $150 together

Manual pedals set $150

Clutch master cylinder $30

Steering column with 2 keys $20

Brake Master Cylinder & booster $80

HKS Turbo Timer $40

Alternator $55

Castor Rods $40 each

Front hub $20 each

Front upper control arm $20 each

Front lower control arm with ball joint $75 each

Front 1/4 panels $150 ono each

Windscreen Washer bottle $20

Radiator overflow bottle(missing cap) $20

HVAC Fan Blower: $20

HVAC unit: $100

Dashboard plastic Garnish inc vents and buttons $100

Instrument Cluster Garnish: $30

Hicas sensor unit for standard steering wheel: $10

Indicator Stalk assy: $40

Steering wheel surround (Has small mounting holes where turbo timer used to be): $10

Sold:

Engine RB25DET (inc turbo, intake, exhaust, loom, ECU, airbox, clutch, everything)

Gearbox

Bonnet

Headlights

Bumper & support

Radiator

Radiator support

Castor rod mounts

Front Brakes; 4 spot calipers,Rotors.

Air Conditioning compressor

Air Conditioning condensor

Steering Wheel

Dashboard

Glovebox

Climate Control button assy

Located in east suburbs Melbourne. Will ship interstate at buyers expense.

Direct deposit or cash only.

Link to comment
https://www.sau.com.au/forums/topic/31465-wrecking-r33-gts25t-black-ser1-melb/
Share on other sites

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

i will get the dash garnish from around stereo and steering wheel if in good condition + i need the plastic trim from drivers arm rest + plastic from around the gear stick and cig lighter + also need plastic from under dash that cover all of the fuses(under steering wheel)

and i also need the dash pad if in good condition is it possible to get these parts sent anywhere in vic?

SkylineGeoff - I am not certain whether or not the recepient of the engine requires the air con compressor, I will get back to you early next week.

Predator - will answer your Q on Saturday by the time I've pulled it apart that far.

EnricoPalazzo - Sorry dont have rear half of car, should have mentioned in first post.

lindsey34, check PM

--edit--

dave, sorry to you too, I should have mentioned it was only a complete front cut, I'm missing everything from behind the gearstick. No doors unfortunately.

gtrGhosTDoGG11 - no, why do people ask for the control panel? Is there a common problem that the windows dont want to move with it? I've repaired one in the past, it was only dry solder joints. They dont look dry, use a relatively powerful electronics soldering iron (30w so no plumbing irons :() and go over each joint. Should work afterwards....

Bozz thanks for quick reply. The reason I am looking for it is that in the bottom of the pocket there is a screw which holds it down. The plastic has cracked in it so its not being held down.

I guess I could probably fix it now Ithink about it :S

Bozz

as well as the other enquiry I made regarding the A/C comp, I'll be happy to take the Steering wheel off your hands at that price. I'll wait for an answer on the comp before arranging to come and pick it up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...