Jump to content
SAU Community

Recommended Posts

Available:

Update! 26/5/2004

Pictures HERE (click)

These parts are available. If it is not listed here then it has been sold or is not available. Please do not ask for parts that are not listed here or I will give you a ridiculously high price and after you've paid for it, I'll go to a wrecker and buy it really cheap and send it to you.

phorj now has all of the parts, please PM him with enquiries:

http://www.skylinesaustralia.com/forums/pr...do=newpm&u=1333

KYB Gear Climb struts. RS*R springs $300 ono for the front pair

Quarter Panel black (click) $150 each

Steering rack $100

K-frame $75

Power steering pump $40

or rack, K-frame and pump for $150 together

Manual pedals set $150

Clutch master cylinder $30

Steering column with 2 keys $20

Brake Master Cylinder & booster $80

HKS Turbo Timer $40

Alternator $55

Castor Rods $40 each

Front hub $20 each

Front upper control arm $20 each

Front lower control arm with ball joint $75 each

Front 1/4 panels $150 ono each

Windscreen Washer bottle $20

Radiator overflow bottle(missing cap) $20

HVAC Fan Blower: $20

HVAC unit: $100

Dashboard plastic Garnish inc vents and buttons $100

Instrument Cluster Garnish: $30

Hicas sensor unit for standard steering wheel: $10

Indicator Stalk assy: $40

Steering wheel surround (Has small mounting holes where turbo timer used to be): $10

Sold:

Engine RB25DET (inc turbo, intake, exhaust, loom, ECU, airbox, clutch, everything)

Gearbox

Bonnet

Headlights

Bumper & support

Radiator

Radiator support

Castor rod mounts

Front Brakes; 4 spot calipers,Rotors.

Air Conditioning compressor

Air Conditioning condensor

Steering Wheel

Dashboard

Glovebox

Climate Control button assy

Located in east suburbs Melbourne. Will ship interstate at buyers expense.

Direct deposit or cash only.

Link to comment
https://www.sau.com.au/forums/topic/31465-wrecking-r33-gts25t-black-ser1-melb/
Share on other sites

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

i will get the dash garnish from around stereo and steering wheel if in good condition + i need the plastic trim from drivers arm rest + plastic from around the gear stick and cig lighter + also need plastic from under dash that cover all of the fuses(under steering wheel)

and i also need the dash pad if in good condition is it possible to get these parts sent anywhere in vic?

SkylineGeoff - I am not certain whether or not the recepient of the engine requires the air con compressor, I will get back to you early next week.

Predator - will answer your Q on Saturday by the time I've pulled it apart that far.

EnricoPalazzo - Sorry dont have rear half of car, should have mentioned in first post.

lindsey34, check PM

--edit--

dave, sorry to you too, I should have mentioned it was only a complete front cut, I'm missing everything from behind the gearstick. No doors unfortunately.

gtrGhosTDoGG11 - no, why do people ask for the control panel? Is there a common problem that the windows dont want to move with it? I've repaired one in the past, it was only dry solder joints. They dont look dry, use a relatively powerful electronics soldering iron (30w so no plumbing irons :() and go over each joint. Should work afterwards....

Bozz thanks for quick reply. The reason I am looking for it is that in the bottom of the pocket there is a screw which holds it down. The plastic has cracked in it so its not being held down.

I guess I could probably fix it now Ithink about it :S

Bozz

as well as the other enquiry I made regarding the A/C comp, I'll be happy to take the Steering wheel off your hands at that price. I'll wait for an answer on the comp before arranging to come and pick it up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...