Jump to content
SAU Community

Recommended Posts

Set of four Starform wheels (these are a high quality jap copy of German BBS mesh style wheels) - see pic below.

Front 17x8", +40mm offset, 225/45 tyres

Rear 17x9", +45mm offset, 245/40 tyres

5 stud - the offsets suit R33, 200SX, 300ZX and Supra (I had them on my R33).

Excellent condition - minor kerb scrapes on a couple.

Asking $1,300 total including nuts & locknuts, but I would prefer Adelaide buyers who can inspect and collect in person.

Link to comment
https://www.sau.com.au/forums/topic/31468-fs-jap-17-wheels-tyres/
Share on other sites

those tyres rock!!! they are the first set of tyres i've used that hook up even when taking off with a little grunt i had dunlop lemanz and could fry em at 60km easy but no chance with the contisports....perform very well in the wet as well!!! i might snap em up for the cressi if i get a little money left ova

1/ Do these rims fit on the front, without having to 'shave' ANY part of the front calipars?

2/ Would you consider these to be a lightweight rim, or are they at least lighter than the stockies? I have 19's but am starting to do some track work, and these are too heavy and tyres are too expensive to burn.

Al - To put them on the front of my R33, I used thin spacers to avoid having to shave anything off the calipers. I can provide these if required. The rims weigh about the same as stock 16" rims, but of course the 17" tyres would be a bit heavier. I can weigh the two together and get back to you if you want.

Matt - just got your PM - I will call you tomorrow.

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...