Jump to content
SAU Community

Recommended Posts

ok so today i made a massive mistake. i tried to replace my r32's instrument dial faces from stock to white aftermarket ones ... so i needed to remove needles .... BIG MISTAKE ... now it looks great .... but the speedo and fuel arnt working and the taco is abit off .... any ideas on places near the gold coast that i can take it to be repaired/recalibrated ???

any help would be great

thanks

Link to comment
https://www.sau.com.au/forums/topic/315035-fed-my-dash-instrument/
Share on other sites

*pacefalm*

These are quite easy to do, not sure how you rooted it... but try Elite Racing Development (ERD) near Yatala and see if Dan can help you out. Otherwise Gold Coastish you've got Redline EFI (Burleigh) and EFI (Yatala).

This is a good lesson in why you shouldn't rice up your car. But hopefully one of those guys can sort out the bollocking you gave it.

Edited by Isola

thanks heapss matee

ive got it working

but the speedo is out in a range of about 10-15km =/

fuels now working perfectly after some fiddling

and taco is still alittle out ...

will have to ring redline in burleigh and get them to have a look ... may have to recalibrate it

on the upside .... it looks good haha =/

Edited by aussietroy
GPS tends to be about 10 km/h out from the tacho on my car / gps

cars are tonned down a bit . gps is more accurate.

anyway speedo on r32s are cable driven so you manually have to calibrate it , either by holding the needle or fiddling with the cable strength.

hope that helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
×
×
  • Create New...